The stim package fits the Stability Informed Model which
incorporates variable stability–how a variable correlates with future
versions of itself–into cross-sectional estimates. Assuming the process
is stationary, the model is specified correctly, and the stability
values are correct, the Stability Informed Model can estimate parameters
that are unbiased for cross-lagged (longitudinal) effects even when only
cross-sectional data are available.
For more information on the Stability Informed Model see https://psyarxiv.com/vg5as
This tutorial outlines how to estimate a Stability Informed Model
using the stim package within an SEM framework.
You can install the development version of stim from
GitHub with
devtools::install_github("https://github.com/AnnaWysocki/stim")Let’s create some data to use in our example.
library(stim)
S <- matrix(c(1, .3, .3,
.3, 1, .3,
.3, .3, 1),
nrow = 3, ncol = 3,
dimnames = list(c("X", "Y", "Z"),
c("X", "Y", "Z")))stim Function OverviewEstimate a single or a set of Stability Informed Models using the
stim() function.
stim() has five arguments
More details on the model and stability
arguments can be found below.
model ArgumentInput an object with the cross-sectional model specified in lavaan syntax. The model syntax should be specified as a cross-sectional path model in lavaan (See https://lavaan.ugent.be/tutorial/tutorial.pdf for information on lavaan syntax).
This input determines what parameters/effects are estimated. Note, the Stability Informed model can estimate a maximum of \[ \frac{p (p-1)}{2} \] parameters (where p is the number of measured variables). These parameters can be, for example, cross-lagged effects or residual covariances.
To estimate the effect of X on Y, I could create the following object
model <- 'Y ~ X' # outcome ~ predictorMore complex models can be specified as well.
model2 <- 'Y ~ X
Z ~ X + Y'The default is to constrain all residual covariances to 0. But this constraint can be relaxed by specifying a residual covariance in the model syntax.
model2 <- 'Y ~ X
Z ~ X + Y
X ~~ Y' # Allows X and Y to have covarying residualsThe above model object specifies 4 estimated parameters, but, with 3 measured variables, the Stability Informed Model can only estimate 3 parameters. The remaining effects can either be fixed to 0 or fixed to a non-zero value.
model2 <- 'Y ~ .6 * X # fix effect of X on Y to .6
Z ~ X + Y
X ~~ Y' Labels can be specified for the estimated parameters.
model2 <- 'Y ~ .6 * X
Z ~ Effect1 * X + Y # label the estimated effect of X on Z
X ~~ Y'If no label is specified for a cross-lagged parameter, the default label is ‘CL’ and a subscript with the predictor name and the outcome name.
Residual covariances are labeled ‘RCov’ and a subscript with the names of the two variable whose residuals are covarying.
stability ArgumentInput a object with the stability information for each variable in the model.
To fit model2, the stability input should have a
stability value for X, Y, and Z.
stability <- c(X = .5, Y = .1, Z = .1)The stability values need to be named, and the names must match the
variable names in the data or S input.
Multiple stability values can be specified for each variable. This results in multiple Stability Informed Models being estimated (one for each stability condition).
stability <- data.frame(X = c(.5, .55), Y = c(.1, .15), Z = c(.1, .2))
rownames(stability) <- c("Model 1", "Model 2")
stability
#> X Y Z
#> Model 1 0.50 0.10 0.1
#> Model 2 0.55 0.15 0.2If this is the stability input, two models will be
estimated. One model where the stability values for X, Y, and Z are .5,
.1, and .1, respectively, and one where the stability values for X, Y,
and Z are .55, .15, and .2, respectively.
modelFit <- stim(S = S, n = 1000, model = model2, stability = stability)
#> StIM: Stability Informed Models
#> -------------------------------------
#> -------------------------------------
#>
#> Variables (p): 3
#> Sample Size (n): 1000
#> Estimated Parameters (q): 3
#> Degrees of Freedom: 0
#> Number of Models Estimated: 2
#>
#> -------------------------------------Some information about the model(s) is automatically printed out when the stim() function is run. The summary() function can be used to print out more information
summary(modelFit)
#> StIM: Stability Informed Models
#> -------------------------------------
#> -------------------------------------
#>
#> Variables (p): 3
#> Sample Size (n): 1000
#> Estimated Parameters (q): 3
#> Degrees of Freedom: 0
#>
#> -------------------------------------
#> Model 1
#>
#> Stability:
#> X Y Z
#> 0.5 0.1 0.1
#>
#> Autoregressive Effects:
#> ARX ARY ARZ
#> 0.50025018 -0.07985993 -0.24540155
#>
#> Cross Lagged Effects:
#> Effect Estimate Standard.Error P.Value
#> Effect1 0.468 0.117 0.000
#> CLYZ 0.684 0.616 0.266
#>
#> Residual Covariances:
#> Effect Estimate Standard.Error P.Value
#> RCovYX 0.012 0.037 0.754
#>
#> -------------------------------------
#> Model 2
#>
#> Stability:
#> X Y Z
#> 0.55 0.15 0.2
#>
#> Autoregressive Effects:
#> ARX ARY ARZ
#> 0.55027521 -0.02983492 -0.15827996
#>
#> Cross Lagged Effects:
#> Effect Estimate Standard.Error P.Value
#> Effect1 0.334 0.348 0.337
#> CLYZ 0.861 1.648 0.601
#>
#> Residual Covariances:
#> Effect Estimate Standard.Error P.Value
#> RCovYX -0.025 0.037 0.49
#>
#> -------------------------------------
#> modelFit is a stim object that contains a list of objects with information for the Stability Informed Model
A table of the stability conditions. Each row contains the stability information for one Stability Informed Model.
modelFit$stability
#> X Y Z
#> Model 1 0.50 0.10 0.1
#> Model 2 0.55 0.15 0.2A table with information on the cross-lagged paths. It has the predictor and outcome names, cross-lagged effect labels, and whether the cross-lagged path is estimated or constrained.
modelFit$CLEffectTable
#> predictor outcome name estimate
#> 1 X_0 Y 0.6 No
#> 2 X_0 Z Effect1 Yes
#> 3 Y_0 Z CLYZ YesA list of matrices with the estimated cross-lagged effects and standard errors and p-values for each of the estimated cross-lagged effects. Each matrix corresponds to one of the estimated Stability Informed Models.
modelFit$CLMatrices
#> $Model1
#> Effect Estimate Standard.Error P.Value
#> 3 Effect1 0.468 0.117 0.000
#> 6 CLYZ 0.684 0.616 0.266
#>
#> $Model2
#> Effect Estimate Standard.Error P.Value
#> 3 Effect1 0.334 0.348 0.337
#> 6 CLYZ 0.861 1.648 0.601A list of matrices with the estimated residual covariances and their standard errors and p-values. Each matrix corresponds to one of the estimated Stability Informed Models.
modelFit$RCovMatrices
#> $Model1
#> Effect Estimate Standard.Error P.Value
#> 16 RCovYX 0.012 0.037 0.754
#>
#> $Model2
#> Effect Estimate Standard.Error P.Value
#> 16 RCovYX -0.025 0.037 0.49A list of vectors (1 for each Stability Informed Model that was estimated) with the values for the auto-regressive effects.
A list of vectors with the values for each auto-regressive effect. Each vector corresponds to one of the estimated Stability Informed Models.
modelFit$ARVector
#> $Model1
#> ARX ARY ARZ
#> 0.50025018 -0.07985993 -0.24540155
#>
#> $Model2
#> ARX ARY ARZ
#> 0.55027521 -0.02983492 -0.15827996A list of lavaan objects (1 for each Stability Informed Model)
To output the lavaan object easily, you can use the
lavaanSummary() function
lavaanSummary(modelFit)
#> Model 1
#> lavaan 0.6-12 ended normally after 143 iterations
#>
#> Estimator ML
#> Optimization method NLMINB
#> Number of model parameters 12
#>
#> Number of observations 1000
#>
#> Model Test User Model:
#>
#> Test statistic 0.000
#> Degrees of freedom 0
#>
#> Parameter Estimates:
#>
#> Standard errors Standard
#> Information Expected
#> Information saturated (h1) model Structured
#>
#> Latent Variables:
#> Estimate Std.Err z-value P(>|z|)
#> X_0 =~
#> X (ARX) 0.500
#> Y 0.600
#> Z (Eff1) 0.468 0.117 4.009 0.000
#> Y_0 =~
#> X 0.000
#> Y (ARY) -0.080 0.020 -4.033 0.000
#> Z (CLYZ) 0.684 0.616 1.111 0.266
#> Z_0 =~
#> X 0.000
#> Y 0.000
#> Z (ARZ) -0.245 0.160 -1.534 0.125
#>
#> Covariances:
#> Estimate Std.Err z-value P(>|z|)
#> X_0 ~~
#> Y_0 (CvXY) 0.300 0.033 9.087 0.000
#> Z_0 (CvXZ) 0.300 0.033 9.087 0.000
#> Y_0 ~~
#> Z_0 (CvYZ) 0.300 0.033 9.087 0.000
#> .X ~~
#> .Y (RCYX) 0.012 0.037 0.313 0.754
#>
#> Variances:
#> Estimate Std.Err z-value P(>|z|)
#> X_0 (VarX) 1.000
#> Y_0 (VarY) 1.000
#> Z_0 (VarZ) 1.000
#> .X 0.749 0.045 16.765 0.000
#> .Y 0.661 0.048 13.775 0.000
#> .Z 0.229 0.778 0.295 0.768
#>
#> Constraints:
#> |Slack|
#> ARX - (0.5/VarX) 0.000
#> ARY - ((0.1-0.6*CovXY)/VarY) 0.000
#> ARZ-((0.1-(Effect1*CovXZ+CLYZ*CvYZ))/VrZ) 0.000
#> CovXY - ((0.6*VarX+ARY*CovXY)*ARX+RCovYX) 0.000
#> CvXZ-((Effct1*VrX+CLYZ*CvXY+ARZ*CXZ)*ARX) 0.000
#> CYZ-(0.6*(E1*VX+CLYZ*CXY+ARZ*CXZ)+(E1*CXY 0.000
#>
#> Model 2
#> lavaan 0.6-12 ended normally after 193 iterations
#>
#> Estimator ML
#> Optimization method NLMINB
#> Number of model parameters 12
#>
#> Number of observations 1000
#>
#> Model Test User Model:
#>
#> Test statistic 0.000
#> Degrees of freedom 0
#>
#> Parameter Estimates:
#>
#> Standard errors Standard
#> Information Expected
#> Information saturated (h1) model Structured
#>
#> Latent Variables:
#> Estimate Std.Err z-value P(>|z|)
#> X_0 =~
#> X (ARX) 0.550 NA
#> Y 0.600
#> Z (Eff1) 0.334 0.348 0.961 0.337
#> Y_0 =~
#> X 0.000
#> Y (ARY) -0.030 0.020 -1.507 0.132
#> Z (CLYZ) 0.861 1.648 0.522 0.601
#> Z_0 =~
#> X 0.000
#> Y 0.000
#> Z (ARZ) -0.158 0.382 -0.415 0.678
#>
#> Covariances:
#> Estimate Std.Err z-value P(>|z|)
#> X_0 ~~
#> Y_0 (CvXY) 0.300 0.033 9.087 0.000
#> Z_0 (CvXZ) 0.300 0.033 9.087 0.000
#> Y_0 ~~
#> Z_0 (CvYZ) 0.300 0.033 9.087 0.000
#> .X ~~
#> .Y (RCYX) -0.025 0.037 -0.690 0.490
#>
#> Variances:
#> Estimate Std.Err z-value P(>|z|)
#> X_0 (VarX) 1.000
#> Y_0 (VarY) 1.000
#> Z_0 (VarZ) 1.000
#> .X 0.696 0.045 15.590 0.000
#> .Y 0.649 0.048 13.514 0.000
#> .Z 0.062 2.486 0.025 0.980
#>
#> Constraints:
#> |Slack|
#> ARX - (0.55/VarX) 0.000
#> ARY - ((0.15-0.6*CovXY)/VarY) 0.000
#> ARZ-((0.2-(Effect1*CovXZ+CLYZ*CvYZ))/VrZ) 0.000
#> CovXY - ((0.6*VarX+ARY*CovXY)*ARX+RCovYX) 0.000
#> CvXZ-((Effct1*VrX+CLYZ*CvXY+ARZ*CXZ)*ARX) 0.000
#> CYZ-(0.6*(E1*VX+CLYZ*CXY+ARZ*CXZ)+(E1*CXY 0.000You can also print a subset of the lavaan objects by using the
subset argument.
lavaanSummary(modelFit, subset = 1)
#> lavaan 0.6-12 ended normally after 143 iterations
#>
#> Estimator ML
#> Optimization method NLMINB
#> Number of model parameters 12
#>
#> Number of observations 1000
#>
#> Model Test User Model:
#>
#> Test statistic 0.000
#> Degrees of freedom 0
#>
#> Parameter Estimates:
#>
#> Standard errors Standard
#> Information Expected
#> Information saturated (h1) model Structured
#>
#> Latent Variables:
#> Estimate Std.Err z-value P(>|z|)
#> X_0 =~
#> X (ARX) 0.500
#> Y 0.600
#> Z (Eff1) 0.468 0.117 4.009 0.000
#> Y_0 =~
#> X 0.000
#> Y (ARY) -0.080 0.020 -4.033 0.000
#> Z (CLYZ) 0.684 0.616 1.111 0.266
#> Z_0 =~
#> X 0.000
#> Y 0.000
#> Z (ARZ) -0.245 0.160 -1.534 0.125
#>
#> Covariances:
#> Estimate Std.Err z-value P(>|z|)
#> X_0 ~~
#> Y_0 (CvXY) 0.300 0.033 9.087 0.000
#> Z_0 (CvXZ) 0.300 0.033 9.087 0.000
#> Y_0 ~~
#> Z_0 (CvYZ) 0.300 0.033 9.087 0.000
#> .X ~~
#> .Y (RCYX) 0.012 0.037 0.313 0.754
#>
#> Variances:
#> Estimate Std.Err z-value P(>|z|)
#> X_0 (VarX) 1.000
#> Y_0 (VarY) 1.000
#> Z_0 (VarZ) 1.000
#> .X 0.749 0.045 16.765 0.000
#> .Y 0.661 0.048 13.775 0.000
#> .Z 0.229 0.778 0.295 0.768
#>
#> Constraints:
#> |Slack|
#> ARX - (0.5/VarX) 0.000
#> ARY - ((0.1-0.6*CovXY)/VarY) 0.000
#> ARZ-((0.1-(Effect1*CovXZ+CLYZ*CvYZ))/VrZ) 0.000
#> CovXY - ((0.6*VarX+ARY*CovXY)*ARX+RCovYX) 0.000
#> CvXZ-((Effct1*VrX+CLYZ*CvXY+ARZ*CXZ)*ARX) 0.000
#> CYZ-(0.6*(E1*VX+CLYZ*CXY+ARZ*CXZ)+(E1*CXY 0.000A vector with logical information on whether there were any errors or warnings for each of the estimated models.
FALSE means no warnings TRUE means warnings.
modelFit$NoWarnings # Means no warnings for both models
#> [1] TRUE TRUEThe user-specified model syntax (input for model argument)
modelFit$CSModelSyntax
#> [1] "Y ~ .6 * X \n Z ~ Effect1 * X + Y # label the estimated effect of X on Z\n \n X ~~ Y"The syntax for the Stability Informed Model–model syntax for the lavaan function. This contains the syntax to specify the structural part of the Stability Informed Model as well as the parameter constraints for the auto-regressive paths and the latent correlations
modelFit$SIMSyntax
#> [[1]]
#> [1] "X_0=~ARX*X+0.6*Y+Effect1*Z"
#> [2] "Y_0=~0*X+ARY*Y+CLYZ*Z"
#> [3] "Z_0=~0*X+0*Y+ARZ*Z"
#> [4] "X_0~~ CovXY*Y_0"
#> [5] "X_0~~ CovXZ*Z_0"
#> [6] "Y_0~~ CovYZ*Z_0"
#> [7] "X_0~~VarX*X_0"
#> [8] "Y_0~~VarY*Y_0"
#> [9] "Z_0~~VarZ*Z_0"
#> [10] "Y~~RCovYX*X"
#> [11] "ARX==0.5/VarX"
#> [12] "ARY==(0.1-0.6*CovXY)/VarY"
#> [13] "ARZ==(0.1-(Effect1*CovXZ+CLYZ*CovYZ))/VarZ"
#> [14] "CovXY==(0.6*VarX+ARY*CovXY)*ARX+RCovYX"
#> [15] "CovXZ==(Effect1*VarX+CLYZ*CovXY+ARZ*CovXZ)*ARX"
#> [16] "CovYZ==0.6*(Effect1*VarX+CLYZ*CovXY+ARZ*CovXZ)+(Effect1*CovXY+CLYZ*VarY+ARZ*CovYZ)*ARY"
#>
#> [[2]]
#> [1] "X_0=~ARX*X+0.6*Y+Effect1*Z"
#> [2] "Y_0=~0*X+ARY*Y+CLYZ*Z"
#> [3] "Z_0=~0*X+0*Y+ARZ*Z"
#> [4] "X_0~~ CovXY*Y_0"
#> [5] "X_0~~ CovXZ*Z_0"
#> [6] "Y_0~~ CovYZ*Z_0"
#> [7] "X_0~~VarX*X_0"
#> [8] "Y_0~~VarY*Y_0"
#> [9] "Z_0~~VarZ*Z_0"
#> [10] "Y~~RCovYX*X"
#> [11] "ARX==0.55/VarX"
#> [12] "ARY==(0.15-0.6*CovXY)/VarY"
#> [13] "ARZ==(0.2-(Effect1*CovXZ+CLYZ*CovYZ))/VarZ"
#> [14] "CovXY==(0.6*VarX+ARY*CovXY)*ARX+RCovYX"
#> [15] "CovXZ==(Effect1*VarX+CLYZ*CovXY+ARZ*CovXZ)*ARX"
#> [16] "CovYZ==0.6*(Effect1*VarX+CLYZ*CovXY+ARZ*CovXZ)+(Effect1*CovXY+CLYZ*VarY+ARZ*CovYZ)*ARY"Model implied equations for the latent covariances and auto-regressive paths
modelFit$modelImpliedEquations
#> [[1]]
#> [1] "ARX==0.5/VarX"
#> [2] "ARY==(0.1-0.6*CovXY)/VarY"
#> [3] "ARZ==(0.1-(Effect1*CovXZ+CLYZ*CovYZ))/VarZ"
#> [4] "CovXY==(0.6*VarX+ARY*CovXY)*ARX+RCovYX"
#> [5] "CovXZ==(Effect1*VarX+CLYZ*CovXY+ARZ*CovXZ)*ARX"
#> [6] "CovYZ==0.6*(Effect1*VarX+CLYZ*CovXY+ARZ*CovXZ)+(Effect1*CovXY+CLYZ*VarY+ARZ*CovYZ)*ARY"
#>
#> [[2]]
#> [1] "ARX==0.55/VarX"
#> [2] "ARY==(0.15-0.6*CovXY)/VarY"
#> [3] "ARZ==(0.2-(Effect1*CovXZ+CLYZ*CovYZ))/VarZ"
#> [4] "CovXY==(0.6*VarX+ARY*CovXY)*ARX+RCovYX"
#> [5] "CovXZ==(Effect1*VarX+CLYZ*CovXY+ARZ*CovXZ)*ARX"
#> [6] "CovYZ==0.6*(Effect1*VarX+CLYZ*CovXY+ARZ*CovXZ)+(Effect1*CovXY+CLYZ*VarY+ARZ*CovYZ)*ARY"