# When testing changes, the easiest way to reload the theme is with /RELOAD. # This reloads the configuration file too, so if you did any changes remember # to /SAVE it first. Remember also that /SAVE overwrites the theme file with # old data so keep backups :) # TEMPLATES: # The real text formats that irssi uses are the ones you can find with # /FORMAT command. Back in the old days all the colors and texts were mixed # up in those formats, and it was really hard to change the colors since you # might have had to change them in tens of different places. So, then came # this templating system. # Now the /FORMATs don't have any colors in them, and they also have very # little other styling. Most of the stuff you need to change is in this # theme file. If you can't change something here, you can always go back # to change the /FORMATs directly, they're also saved in these .theme files. # So .. the templates. They're those {blahblah} parts you see all over the # /FORMATs and here. Their usage is simply {name parameter1 parameter2}. # When irssi sees this kind of text, it goes to find "name" from abstracts # block below and sets "parameter1" into $0 and "parameter2" into $1 (you # can have more parameters of course). Templates can have subtemplates. # Here's a small example: # /FORMAT format hello {colorify {underline world}} # abstracts = { colorify = "%G$0-%n"; underline = "%U$0-%U"; } # When irssi expands the templates in "format", the final string would be: # hello %G%Uworld%U%n # ie. underlined bright green "world" text. # and why "$0-", why not "$0"? $0 would only mean the first parameter, # $0- means all the parameters. With {underline hello world} you'd really # want to underline both of the words, not just the hello (and world would # actually be removed entirely). # COLORS: # You can find definitions for the color format codes in docs/formats.txt. # There's one difference here though. %n format. Normally it means the # default color of the terminal (white mostly), but here it means the # "reset color back to the one it was in higher template". For example # if there was /FORMAT test %g{foo}bar, and foo = "%Y$0%n", irssi would # print yellow "foo" (as set with %Y) but "bar" would be green, which was # set at the beginning before the {foo} template. If there wasn't the %g # at start, the normal behaviour of %n would occur. If you _really_ want # to use the terminal's default color, use %N. ############################################################################# # default foreground color (%N) - -1 is the "default terminal color" default_color = "-1"; # print timestamp/servertag at the end of line, not at beginning info_eol = "false"; # these characters are automatically replaced with specified color # (dark grey by default) replaces = { "[]=" = "%K$*%n"; }; abstracts = { ## ## generic ## # text to insert at the beginning of each non-message line line_start = "*** "; # timestamp styling, nothing by default timestamp = "$*"; # any kind of text that needs hilighting, default is to bold hilight = "$*"; # any kind of error message, default is bright red error = "$*"; # channel name is printed channel = "$*"; # nick is printed nick = "$*"; # nick host is printed nickhost = "[$*]"; # server name is printed server = "$*"; # some kind of comment is printed comment = "[$*]"; # reason for something is printed (part, quit, kick, ..) reason = "{comment $*}"; # mode change is printed ([+o nick]) mode = "{comment $*}"; ## ## channel specific messages ## # highlighted nick/host is printed (joins) channick_hilight = "$*"; chanhost_hilight = "{nickhost $*}"; # nick/host is printed (parts, quits, etc.) channick = "$*"; chanhost = "{nickhost $*}"; # highlighted channel name is printed channelhilight = "$*"; # ban/ban exception/invite list mask is printed ban = "$*"; ## ## messages ## # the basic styling of how to print message, $0 = nick mode, $1 = nick msgnick = "<$1> "; # message from you is printed. "msgownnick" specifies the styling of the # nick ($0 part in msgnick) and "ownmsgnick" specifies the styling of the # whole line. # Example1: You want the message text to be green: # ownmsgnick = "{msgnick $0 $1-}%g"; # Example2.1: You want < and > chars to be yellow: # ownmsgnick = "%Y{msgnick $0 $1-%Y}%n"; # (you'll also have to remove <> from replaces list above) # Example2.2: But you still want to keep <> grey for other messages: # pubmsgnick = "%K{msgnick $0 $1-%K}%n"; # pubmsgmenick = "%K{msgnick $0 $1-%K}%n"; # pubmsghinick = "%K{msgnick $1 $0$2-%n%K}%n"; # ownprivmsgnick = "%K{msgnick $*%K}%n"; # privmsgnick = "%K{msgnick %R$*%K}%n"; # $0 = nick mode, $1 = nick ownmsgnick = "{msgnick $0 $1-}"; ownnick = "%W$*%n"; # public message in channel, $0 = nick mode, $1 = nick pubmsgnick = "{msgnick $0 $1-}"; pubnick = "%N$*%n"; # public message in channel meant for me, $0 = nick mode, $1 = nick pubmsgmenick = "{msgnick $0 $1-}"; menick = "%Y$*%n"; # public highlighted message in channel # $0 = highlight color, $1 = nick mode, $2 = nick pubmsghinick = "{msgnick $1 $0$2-%n}"; # channel name is printed with message msgchannel = "%K:%c$*%n"; # private message, $0 = nick, $1 = host privmsg = "*$0* "; # private message from you, $0 = "msg", $1 = target nick ownprivmsg = "-> *$1* "; # own private message in query ownprivmsgnick = "-> *$1* "; ownprivnick = "-> *$0* "; # private message in query privmsgnick = "*$0* "; ## ## Actions (/ME stuff) ## # used internally by this theme action_core = "* $*"; # generic one that's used by most actions action = "{action_core $*} "; # own action, both private/public ownaction = "{action $*}"; # own action with target, both private/public ownaction_target = "{action_core $0}:$1%n "; # private action sent by others pvtaction = "(*) $* "; pvtaction_query = "{action $*}"; # public action sent by others pubaction = "{action $*}"; ## ## other IRC events ## # whois whois = "%# $[8]0 : $1-"; # notices ownnotice = "[$0($1-)] "; notice = "-$*- "; pubnotice_channel = ":$*"; pvtnotice_host = ""; servernotice = "!$* "; # CTCPs ownctcp = "[$0($1-)] "; ctcp = "*** $*"; # wallops wallop = "$*: "; wallop_nick = "$*"; wallop_action = " * $*%n "; # netsplits netsplit = "$*"; netjoin = "$*"; # /names list names_prefix = "*** "; names_nick = "$0$1- "; names_nick_op = "{names_nick $*}"; names_nick_halfop = "{names_nick $*}"; names_nick_voice = "{names_nick $*}"; names_users = "[$*]"; names_channel = "$*"; # DCC dcc = "$*"; dccfile = "$*"; # DCC chat, own msg/action dccownmsg = "[$0($1-)] "; dccownnick = "$*"; dccownquerynick = "$*"; dccownaction = "{action $*}"; dccownaction_target = "{action_core $0}:$1 "; # DCC chat, others dccmsg = "[$1-($0)] "; dccquerynick = "%G$*%n"; dccaction = "%W (*dcc*) $*%n %|"; ## ## statusbar ## # default background for all statusbars. You can also give # the default foreground color for statusbar items. sb_background = "%4%w"; # default backround for "default" statusbar group #sb_default_bg = "%4"; # background for prompt / input line sb_prompt_bg = "%n"; # background for info statusbar sb_info_bg = "%8"; # background for topicbar (same default) #sb_topic_bg = "%4"; # text at the beginning of statusbars. sb-item already puts # space there,so we don't use anything by default. sbstart = ""; # text at the end of statusbars. Use space so that it's never # used for anything. sbend = " "; topicsbstart = "{sbstart $*}"; topicsbend = "{sbend $*}"; prompt = "$*> "; sb = " [$*]"; sbmode = "(+$*)"; sbaway = " (zZzZ)"; sbservertag = ":$0 "; # activity in statusbar # ',' separator sb_act_sep = "$*"; # normal text sb_act_text = "$*"; # public message sb_act_msg = "$*"; # hilight sb_act_hilight = "$*"; # hilight with specified color, $0 = color, $1 = text sb_act_hilight_color = "$0$1-%n"; }; formats = { "fe-common/core" = { timestamp = "{$Z}"; own_msg_private_query = "{ownprivnick $0}$1"; }; "fe-common/irc" = { ctcp_reply = "{ctcp CTCP {hilight $0} reply from {nick $1}: $2 }"; ctcp_reply_channel = "{ctcp CTCP {hilight $0} reply from {nick $1} in channel {channel $3}: $2 }"; ctcp_ping_reply = "{ctcp CTCP {hilight PING} reply from {nick $0}: $1.$[-3.0]2 seconds }"; }; };