Diff::LCS

Diff::LCS 1.2.4

Computes "intelligent" differences between two sequenced Enumerables. This is an implementation of the McIlroy-Hunt "diff" algorithm for Enumerable objects that include Diffable.

Based on Mario I. Wolczko's Smalltalk version (1.2, 1993) and Ned Konz's Perl version (Algorithm::Diff 1.15).

Synopsis

require 'diff/lcs'

seq1 = %w(a b c e h j l m n p)
seq2 = %w(b c d e f j k l m r s t)

lcs = Diff::LCS.lcs(seq1, seq2)
diffs = Diff::LCS.diff(seq1, seq2)
sdiff = Diff::LCS.sdiff(seq1, seq2)
seq = Diff::LCS.traverse_sequences(seq1, seq2, callback_obj)
bal = Diff::LCS.traverse_balanced(seq1, seq2, callback_obj)
seq2 == Diff::LCS.patch(seq1, diffs)
seq2 == Diff::LCS.patch!(seq1, diffs)
seq1 == Diff::LCS.unpatch(seq2, diffs)
seq1 == Diff::LCS.unpatch!(seq2, diffs)
seq2 == Diff::LCS.patch(seq1, sdiff)
seq2 == Diff::LCS.patch!(seq1, sdiff)
seq1 == Diff::LCS.unpatch(seq2, sdiff)
seq1 == Diff::LCS.unpatch!(seq2, sdiff)

Alternatively, objects can be extended with Diff::LCS:

seq1.extend(Diff::LCS)
lcs = seq1.lcs(seq2)
diffs = seq1.diff(seq2)
sdiff = seq1.sdiff(seq2)
seq = seq1.traverse_sequences(seq2, callback_obj)
bal = seq1.traverse_balanced(seq2, callback_obj)
seq2 == seq1.patch(diffs)
seq2 == seq1.patch!(diffs)
seq1 == seq2.unpatch(diffs)
seq1 == seq2.unpatch!(diffs)
seq2 == seq1.patch(sdiff)
seq2 == seq1.patch!(sdiff)
seq1 == seq2.unpatch(sdiff)
seq1 == seq2.unpatch!(sdiff)

Default extensions are provided for Array and String objects through the use of 'diff/lcs/array' and 'diff/lcs/string'.

Introduction (by Mark-Jason Dominus)

The following text is from the Perl documentation. The only changes have been to make the text appear better in Rdoc.

I once read an article written by the authors of diff; they said that they hard worked very hard on the algorithm until they found the right one.

I think what they ended up using (and I hope someone will correct me, because I am not very confident about this) was the `longest common subsequence' method. In the LCS problem, you have two sequences of items:

a b c d f g h j q z
a b c d e f g i j k r x y z

and you want to find the longest sequence of items that is present in both original sequences in the same order. That is, you want to find a new sequence S which can be obtained from the first sequence by deleting some items, and from the second sequence by deleting other items. You also want S to be as long as possible. In this case S is:

a b c d f g j z

From there it's only a small step to get diff-like output:

e   h i   k   q r x y
+   - +   +   - + + +

This module solves the LCS problem. It also includes a canned function to generate diff-like output.

It might seem from the example above that the LCS of two sequences is always pretty obvious, but that's not always the case, especially when the two sequences have many repeated elements. For example, consider

a x b y c z p d q
a b c a x b y c z

A naive approach might start by matching up the a and b that appear at the beginning of each sequence, like this:

a x b y c         z p d q
a   b   c a b y c z

This finds the common subsequence +a b c z+. But actually, the LCS is +a x b y c z+:

      a x b y c z p d q
a b c a x b y c z

Author

This version is by Austin Ziegler <austin@rubyforge.org>.

It is based on the Perl Algorithm::Diff (1.15) by Ned Konz , copyright &copy; 2000&ndash;2002 and the Smalltalk diff version by Mario I. Wolczko, copyright &copy; 1993. Documentation includes work by Mark-Jason Dominus.

Licence

Copyright &copy; 2004&ndash;2013 Austin Ziegler This program is free software; you can redistribute it and/or modify it under the same terms as Ruby, or alternatively under the Perl Artistic licence.

Credits

Much of the documentation is taken directly from the Perl Algorithm::Diff implementation and was written originally by Mark-Jason Dominus and later by Ned Konz. The basic Ruby implementation was re-ported from the Smalltalk implementation, available at st.cs.uiuc.edu/pub/Smalltalk/MANCHESTER/manchester/4.0/diff.st

sdiff and traverse_balanced were written for the Perl version by Mike Schilli <m@perlmeister.com>.

"The algorithm is described in A Fast Algorithm for Computing Longest Common Subsequences, CACM, vol.20, no.5, pp.350-353, May 1977, with a few minor improvements to improve the speed."

Constants

BalancedCallbacks

An alias for DefaultCallbacks that is used in Diff::LCS#traverse_balanced.

Diff::LCS.LCS(seq1, seq2, Diff::LCS::BalancedCallbacks)
PATCH_MAP
SequenceCallbacks

An alias for DefaultCallbacks that is used in Diff::LCS#traverse_sequences.

Diff::LCS.LCS(seq1, seq2, Diff::LCS::SequenceCallbacks)
VERSION

Public Class Methods

LCS(seq1, seq2, &block) click to toggle source
Alias for: lcs
callbacks_for(callbacks) click to toggle source
# File lib/diff/lcs/callbacks.rb, line 48
def self.callbacks_for(callbacks)
  callbacks.new rescue callbacks
end
diff(seq1, seq2, callbacks = nil, &block) click to toggle source

diff computes the smallest set of additions and deletions necessary to turn the first sequence into the second, and returns a description of these changes.

See Diff::LCS::DiffCallbacks for the default behaviour. An alternate behaviour may be implemented with Diff::LCS::ContextDiffCallbacks. If a Class argument is provided for callbacks, diff will attempt to initialise it. If the callbacks object (possibly initialised) responds to finish, it will be called.

# File lib/diff/lcs.rb, line 244
def diff(seq1, seq2, callbacks = nil, &block) # :yields diff changes:
  diff_traversal(:diff, seq1, seq2, callbacks || Diff::LCS::DiffCallbacks,
                 &block)
end
lcs(seq1, seq2, &block) click to toggle source
# File lib/diff/lcs.rb, line 220
def lcs(seq1, seq2, &block) #:yields seq1[i] for each matched:
  matches = Diff::LCS::Internals.lcs(seq1, seq2)
  ret = []
  string = seq1.kind_of? String
  matches.each_with_index do |e, i|
    unless matches[i].nil?
      v = string ? seq1[i, 1] : seq1[i]
      v = block[v] if block
      ret << v
    end
  end
  ret
end
Also aliased as: LCS
patch(src, patchset, direction = nil) click to toggle source

Applies a patchset to the sequence src according to the direction (:patch or :unpatch), producing a new sequence.

If the direction is not specified, Diff::LCS::patch will attempt to discover the direction of the patchset.

A patchset can be considered to apply forward (:patch) if the following expression is true:

patch(s1, diff(s1, s2)) -> s2

A patchset can be considered to apply backward (:unpatch) if the following expression is true:

patch(s2, diff(s1, s2)) -> s1

If the patchset contains no changes, the src value will be returned as either src.dup or src. A patchset can be deemed as having no changes if the following predicate returns true:

patchset.empty? or
  patchset.flatten.all? { |change| change.unchanged? }

Patchsets

A patchset is always an enumerable sequence of changes, hunks of changes, or a mix of the two. A hunk of changes is an enumerable sequence of changes:

[ # patchset
  # change
  [ # hunk
    # change
  ]
]

The patch method accepts patchsets that are enumerable sequences containing either Diff::LCS::Change objects (or a subclass) or the array representations of those objects. Prior to application, array representations of Diff::LCS::Change objects will be reified.

# File lib/diff/lcs.rb, line 688
def patch(src, patchset, direction = nil)
  # Normalize the patchset.
  has_changes, patchset = Diff::LCS::Internals.analyze_patchset(patchset)

  if not has_changes
    return src.dup if src.respond_to? :dup
    return src
  end

  string = src.kind_of?(String)
  # Start with a new empty type of the source's class
  res = src.class.new

  direction ||= Diff::LCS::Internals.intuit_diff_direction(src, patchset)

  ai = bj = 0

  patch_map = PATCH_MAP[direction]

  patchset.flatten.each do |change|
    # Both Change and ContextChange support #action
    action = patch_map[change.action]

    case change
    when Diff::LCS::ContextChange
      case direction
      when :patch
        el = change.new_element
        op = change.old_position
        np = change.new_position
      when :unpatch
        el = change.old_element
        op = change.new_position
        np = change.old_position
      end

      case action
      when '-' # Remove details from the old string
        while ai < op
          res << (string ? src[ai, 1] : src[ai])
          ai += 1
          bj += 1
        end
        ai += 1
      when '+'
        while bj < np
          res << (string ? src[ai, 1] : src[ai])
          ai += 1
          bj += 1
        end

      res << el
      bj += 1
      when '='
        # This only appears in sdiff output with the SDiff callback.
        # Therefore, we only need to worry about dealing with a single
        # element.
        res << el

        ai += 1
        bj += 1
      when '!'
        while ai < op
          res << (string ? src[ai, 1] : src[ai])
          ai += 1
          bj += 1
        end

      bj += 1
      ai += 1

      res << el
      end
    when Diff::LCS::Change
      case action
      when '-'
        while ai < change.position
          res << (string ? src[ai, 1] : src[ai])
          ai += 1
          bj += 1
        end
      ai += 1
      when '+'
        while bj < change.position
          res << (string ? src[ai, 1] : src[ai])
          ai += 1
          bj += 1
        end

      bj += 1

      res << change.element
      end
    end
  end

  while ai < src.size
    res << (string ? src[ai, 1] : src[ai])
    ai += 1
    bj += 1
  end

  res
end
patch!(src, patchset) click to toggle source

Given a set of patchset, convert the current version to the next version. Does no auto-discovery.

# File lib/diff/lcs.rb, line 801
def patch!(src, patchset)
  patch(src, patchset, :patch)
end
sdiff(seq1, seq2, callbacks = nil, &block) click to toggle source

sdiff computes all necessary components to show two sequences and their minimized differences side by side, just like the Unix utility sdiff does:

old        <     -
same             same
before     |     after
-          >     new

See Diff::LCS::SDiffCallbacks for the default behaviour. An alternate behaviour may be implemented with Diff::LCS::ContextDiffCallbacks. If a Class argument is provided for callbacks, diff will attempt to initialise it. If the callbacks object (possibly initialised) responds to finish, it will be called.

# File lib/diff/lcs.rb, line 263
def sdiff(seq1, seq2, callbacks = nil, &block) #:yields diff changes:
  diff_traversal(:sdiff, seq1, seq2, callbacks || Diff::LCS::SDiffCallbacks,
                 &block)
end
traverse_balanced(seq1, seq2, callbacks = Diff::LCS::BalancedCallbacks) click to toggle source

traverse_balanced is an alternative to traverse_sequences. It uses a different algorithm to iterate through the entries in the computed longest common subsequence. Instead of viewing the changes as insertions or deletions from one of the sequences, traverse_balanced will report changes between the sequences.

The arguments to traverse_balanced are the two sequences to traverse and a callback object, like this:

traverse_balanced(seq1, seq2, Diff::LCS::ContextDiffCallbacks.new)

sdiff is implemented with traverse_balanced.

Callback Methods

Optional callback methods are emphasized.

callbacksmatch

Called when a and b are pointing to common elements in A and B.

callbacksdiscard_a

Called when a is pointing to an element not in B.

callbacksdiscard_b

Called when b is pointing to an element not in A.

callbackschange

Called when a and b are pointing to the same relative position, but A[a] and B[b] are not the same; a change has occurred.

traverse_balanced might be a bit slower than traverse_sequences, noticable only while processing huge amounts of data.

Algorithm

a---+
    v
A = a b c e h j l m n p
B = b c d e f j k l m r s t
    ^
b---+

Matches

If there are two arrows (a and b) pointing to elements of sequences A and B, the arrows will initially point to the first elements of their respective sequences. traverse_sequences will advance the arrows through the sequences one element at a time, calling a method on the user-specified callback object before each advance. It will advance the arrows in such a way that if there are elements A[i] and B[j] which are both equal and part of the longest common subsequence, there will be some moment during the execution of traverse_sequences when arrow a is pointing to A[i] and arrow b is pointing to B[j]. When this happens, traverse_sequences will call callbacks#match and then it will advance both arrows.

Discards

Otherwise, one of the arrows is pointing to an element of its sequence that is not part of the longest common subsequence. traverse_sequences will advance that arrow and will call callbacks#discard_a or callbacks#discard_b, depending on which arrow it advanced.

Changes

If both a and b point to elements that are not part of the longest common subsequence, then traverse_sequences will try to call callbacks#change and advance both arrows. If callbacks#change is not implemented, then callbacks#discard_a and callbacks#discard_b will be called in turn.

The methods for callbacks#match, callbacks#discard_a, callbacks#discard_b, and callbacks#change are invoked with an event comprising the action ("=", "+", "-", or "!", respectively), the indicies i and j, and the elements A[i] and B[j]. Return values are discarded by traverse_balanced.

Context

Note that i and j may not be the same index position, even if a and b are considered to be pointing to matching or changed elements.

# File lib/diff/lcs.rb, line 540
def traverse_balanced(seq1, seq2, callbacks = Diff::LCS::BalancedCallbacks)
  matches = Diff::LCS::Internals.lcs(seq1, seq2)
  a_size = seq1.size
  b_size = seq2.size
  ai = bj = mb = 0
  ma = -1
  string = seq1.kind_of?(String)

  # Process all the lines in the match vector.
  loop do
    # Find next match indices +ma+ and +mb+
    loop do
      ma += 1
      break unless ma < matches.size and matches[ma].nil?
    end

    break if ma >= matches.size # end of matches?
    mb = matches[ma]

    # Change(seq2)
    while (ai < ma) or (bj < mb)
      ax = string ? seq1[ai, 1] : seq1[ai]
      bx = string ? seq2[bj, 1] : seq2[bj]

      case [(ai < ma), (bj < mb)]
      when [true, true]
        if callbacks.respond_to?(:change)
          event = Diff::LCS::ContextChange.new('!', ai, ax, bj, bx)
          event = yield event if block_given?
          callbacks.change(event)
          ai += 1
          bj += 1
        else
          event = Diff::LCS::ContextChange.new('-', ai, ax, bj, bx)
          event = yield event if block_given?
          callbacks.discard_a(event)
          ai += 1
          ax = string ? seq1[ai, 1] : seq1[ai]
          event = Diff::LCS::ContextChange.new('+', ai, ax, bj, bx)
          event = yield event if block_given?
          callbacks.discard_b(event)
          bj += 1
        end
      when [true, false]
        event = Diff::LCS::ContextChange.new('-', ai, ax, bj, bx)
        event = yield event if block_given?
        callbacks.discard_a(event)
        ai += 1
      when [false, true]
        event = Diff::LCS::ContextChange.new('+', ai, ax, bj, bx)
        event = yield event if block_given?
        callbacks.discard_b(event)
        bj += 1
      end
    end

    # Match
    ax = string ? seq1[ai, 1] : seq1[ai]
    bx = string ? seq2[bj, 1] : seq2[bj]
    event = Diff::LCS::ContextChange.new('=', ai, ax, bj, bx)
    event = yield event if block_given?
    callbacks.match(event)
    ai += 1
    bj += 1
  end

  while (ai < a_size) or (bj < b_size)
    ax = string ? seq1[ai, 1] : seq1[ai]
    bx = string ? seq2[bj, 1] : seq2[bj]

    case [(ai < a_size), (bj < b_size)]
    when [true, true]
      if callbacks.respond_to?(:change)
        event = Diff::LCS::ContextChange.new('!', ai, ax, bj, bx)
        event = yield event if block_given?
        callbacks.change(event)
        ai += 1
        bj += 1
      else
        event = Diff::LCS::ContextChange.new('-', ai, ax, bj, bx)
        event = yield event if block_given?
        callbacks.discard_a(event)
        ai += 1
        ax = string ? seq1[ai, 1] : seq1[ai]
        event = Diff::LCS::ContextChange.new('+', ai, ax, bj, bx)
        event = yield event if block_given?
        callbacks.discard_b(event)
        bj += 1
      end
    when [true, false]
      event = Diff::LCS::ContextChange.new('-', ai, ax, bj, bx)
      event = yield event if block_given?
      callbacks.discard_a(event)
      ai += 1
    when [false, true]
      event = Diff::LCS::ContextChange.new('+', ai, ax, bj, bx)
      event = yield event if block_given?
      callbacks.discard_b(event)
      bj += 1
    end
  end
end
traverse_sequences(seq1, seq2, callbacks = Diff::LCS::SequenceCallbacks, &block) click to toggle source

traverse_sequences is the most general facility provided by this module; diff and lcs are implemented as calls to it.

The arguments to traverse_sequences are the two sequences to traverse, and a callback object, like this:

traverse_sequences(seq1, seq2, Diff::LCS::ContextDiffCallbacks.new)

Callback Methods

Optional callback methods are emphasized.

callbacksmatch

Called when a and b are pointing to common elements in A and B.

callbacksdiscard_a

Called when a is pointing to an element not in B.

callbacksdiscard_b

Called when b is pointing to an element not in A.

callbacksfinished_a

Called when a has reached the end of sequence A.

callbacksfinished_b

Called when b has reached the end of sequence B.

Algorithm

a---+
    v
A = a b c e h j l m n p
B = b c d e f j k l m r s t
    ^
b---+

If there are two arrows (a and b) pointing to elements of sequences A and B, the arrows will initially point to the first elements of their respective sequences. traverse_sequences will advance the arrows through the sequences one element at a time, calling a method on the user-specified callback object before each advance. It will advance the arrows in such a way that if there are elements A[i] and B[j] which are both equal and part of the longest common subsequence, there will be some moment during the execution of traverse_sequences when arrow a is pointing to A[i] and arrow b is pointing to B[j]. When this happens, traverse_sequences will call callbacks#match and then it will advance both arrows.

Otherwise, one of the arrows is pointing to an element of its sequence that is not part of the longest common subsequence. traverse_sequences will advance that arrow and will call callbacks#discard_a or callbacks#discard_b, depending on which arrow it advanced. If both arrows point to elements that are not part of the longest common subsequence, then traverse_sequences will advance one of them and call the appropriate callback, but it is not specified which it will call.

The methods for callbacks#match, callbacks#discard_a, and callbacks#discard_b are invoked with an event comprising the action ("=", "+", or "-", respectively), the indicies i and j, and the elements A[i] and B[j]. Return values are discarded by traverse_sequences.

End of Sequences

If arrow a reaches the end of its sequence before arrow b does, traverse_sequence will try to call callbacks#finished_a with the last index and element of A (A[-1]) and the current index and element of B (B[j]). If callbacks#finished_a does not exist, then callbacks#discard_b will be called on each element of B until the end of the sequence is reached (the call will be done with A[-1] and B[j] for each element).

If b reaches the end of B before a reaches the end of A, callbacks#finished_b will be called with the current index and element of A (A[i]) and the last index and element of B (A[-1]). Again, if callbacks#finished_b does not exist on the callback object, then callbacks#discard_a will be called on each element of A until the end of the sequence is reached (A[i] and B[-1]).

There is a chance that one additional callbacks#discard_a or callbacks#discard_b will be called after the end of the sequence is reached, if a has not yet reached the end of A or b has not yet reached the end of B.

# File lib/diff/lcs.rb, line 349
def traverse_sequences(seq1, seq2, callbacks = Diff::LCS::SequenceCallbacks, &block) #:yields change events:
  callbacks ||= Diff::LCS::SequenceCallbacks
  matches = Diff::LCS::Internals.lcs(seq1, seq2)

  run_finished_a = run_finished_b = false
  string = seq1.kind_of?(String)

  a_size = seq1.size
  b_size = seq2.size
  ai = bj = 0

  (0..matches.size).each do |i|
    b_line = matches[i]

    ax = string ? seq1[i, 1] : seq1[i]
    bx = string ? seq2[bj, 1] : seq2[bj]

    if b_line.nil?
      unless ax.nil? or (string and ax.empty?)
        event = Diff::LCS::ContextChange.new('-', i, ax, bj, bx)
        event = yield event if block_given?
        callbacks.discard_a(event)
      end
    else
      loop do
        break unless bj < b_line
        bx = string ? seq2[bj, 1] : seq2[bj]
        event = Diff::LCS::ContextChange.new('+', i, ax, bj, bx)
        event = yield event if block_given?
        callbacks.discard_b(event)
        bj += 1
      end
      bx = string ? seq2[bj, 1] : seq2[bj]
      event = Diff::LCS::ContextChange.new('=', i, ax, bj, bx)
      event = yield event if block_given?
      callbacks.match(event)
      bj += 1
    end
    ai = i
  end
  ai += 1

  # The last entry (if any) processed was a match. +ai+ and +bj+ point
  # just past the last matching lines in their sequences.
  while (ai < a_size) or (bj < b_size)
    # last A?
    if ai == a_size and bj < b_size
      if callbacks.respond_to?(:finished_a) and not run_finished_a
        ax = string ? seq1[-1, 1] : seq1[-1]
        bx = string ? seq2[bj, 1] : seq2[bj]
        event = Diff::LCS::ContextChange.new('>', (a_size - 1), ax, bj, bx)
        event = yield event if block_given?
        callbacks.finished_a(event)
        run_finished_a = true
      else
        ax = string ? seq1[ai, 1] : seq1[ai]
        loop do
          bx = string ? seq2[bj, 1] : seq2[bj]
          event = Diff::LCS::ContextChange.new('+', ai, ax, bj, bx)
          event = yield event if block_given?
          callbacks.discard_b(event)
          bj += 1
          break unless bj < b_size
        end
      end
    end

    # last B?
    if bj == b_size and ai < a_size
      if callbacks.respond_to?(:finished_b) and not run_finished_b
        ax = string ? seq1[ai, 1] : seq1[ai]
        bx = string ? seq2[-1, 1] : seq2[-1]
        event = Diff::LCS::ContextChange.new('<', ai, ax, (b_size - 1), bx)
        event = yield event if block_given?
        callbacks.finished_b(event)
        run_finished_b = true
      else
        bx = string ? seq2[bj, 1] : seq2[bj]
        loop do
          ax = string ? seq1[ai, 1] : seq1[ai]
          event = Diff::LCS::ContextChange.new('-', ai, ax, bj, bx)
          event = yield event if block_given?
          callbacks.discard_a(event)
          ai += 1
          break unless bj < b_size
        end
      end
    end

    if ai < a_size
      ax = string ? seq1[ai, 1] : seq1[ai]
      bx = string ? seq2[bj, 1] : seq2[bj]
      event = Diff::LCS::ContextChange.new('-', ai, ax, bj, bx)
      event = yield event if block_given?
      callbacks.discard_a(event)
      ai += 1
    end

    if bj < b_size
      ax = string ? seq1[ai, 1] : seq1[ai]
      bx = string ? seq2[bj, 1] : seq2[bj]
      event = Diff::LCS::ContextChange.new('+', ai, ax, bj, bx)
      event = yield event if block_given?
      callbacks.discard_b(event)
      bj += 1
    end
  end
end
unpatch!(src, patchset) click to toggle source

Given a set of patchset, convert the current version to the prior version. Does no auto-discovery.

# File lib/diff/lcs.rb, line 795
def unpatch!(src, patchset)
  patch(src, patchset, :unpatch)
end

Public Instance Methods

diff(other, callbacks = nil, &block) click to toggle source

Returns the difference set between self and other. See Diff::LCS#diff.

# File lib/diff/lcs.rb, line 148
def diff(other, callbacks = nil, &block)
  Diff::LCS.diff(self, other, callbacks, &block)
end
lcs(other, &block) click to toggle source

Returns an Array containing the longest common subsequence(s) between self and other. See Diff::LCS#LCS.

lcs = seq1.lcs(seq2)
# File lib/diff/lcs.rb, line 142
def lcs(other, &block) #:yields self[i] if there are matched subsequences:
  Diff::LCS.lcs(self, other, &block)
end
patch(patchset) click to toggle source

Attempts to patch self with the provided patchset. A new sequence based on self and the patchset will be created. See Diff::LCS#patch. Attempts to autodiscover the direction of the patch.

# File lib/diff/lcs.rb, line 176
def patch(patchset)
  Diff::LCS.patch(self, patchset)
end
Also aliased as: unpatch
patch!(patchset) click to toggle source

Attempts to patch self with the provided patchset. A new sequence based on self and the patchset will be created. See Diff::LCS#patch. Does no patch direction autodiscovery.

# File lib/diff/lcs.rb, line 184
def patch!(patchset)
  Diff::LCS.patch!(self, patchset)
end
patch_me(patchset) click to toggle source

Attempts to patch self with the provided patchset, using patch!. If the sequence this is used on supports replace, the value of self will be replaced. See Diff::LCS#patch. Does no patch direction autodiscovery.

# File lib/diff/lcs.rb, line 198
def patch_me(patchset)
  if respond_to? :replace
    replace(patch!(patchset))
  else
    patch!(patchset)
  end
end
sdiff(other, callbacks = nil, &block) click to toggle source

Returns the balanced ("side-by-side") difference set between self and other. See Diff::LCS#sdiff.

# File lib/diff/lcs.rb, line 154
def sdiff(other, callbacks = nil, &block)
  Diff::LCS.sdiff(self, other, callbacks, &block)
end
traverse_balanced(other, callbacks = nil, &block) click to toggle source

Traverses the discovered longest common subsequences between self and other using the alternate, balanced algorithm. See Diff::LCS#traverse_balanced.

# File lib/diff/lcs.rb, line 168
def traverse_balanced(other, callbacks = nil, &block)
  traverse_balanced(self, other, callbacks ||
                    Diff::LCS.YieldingCallbacks, &block)
end
traverse_sequences(other, callbacks = nil, &block) click to toggle source

Traverses the discovered longest common subsequences between self and other. See Diff::LCS#traverse_sequences.

# File lib/diff/lcs.rb, line 160
def traverse_sequences(other, callbacks = nil, &block)
  traverse_sequences(self, other, callbacks ||
                     Diff::LCS.YieldingCallbacks, &block)
end
unpatch(patchset) click to toggle source
Alias for: patch
unpatch!(patchset) click to toggle source

Attempts to unpatch self with the provided patchset. A new sequence based on self and the patchset will be created. See Diff::LCS#unpatch. Does no patch direction autodiscovery.

# File lib/diff/lcs.rb, line 191
def unpatch!(patchset)
  Diff::LCS.unpatch!(self, patchset)
end
unpatch_me(patchset) click to toggle source

Attempts to unpatch self with the provided patchset, using unpatch!. If the sequence this is used on supports replace, the value of self will be replaced. See Diff::LCS#unpatch. Does no patch direction autodiscovery.

# File lib/diff/lcs.rb, line 210
def unpatch_me(patchset)
  if respond_to? :replace
    replace(unpatch!(patchset))
  else
    unpatch!(patchset)
  end
end

[Validate]

Generated with the Darkfish Rdoc Generator 2.