Project Gutenberg's Star Book No. 57: New Tablecloths, by Anonymous

This eBook is for the use of anyone anywhere in the United States and most
other parts of the world at no cost and with almost no restrictions
whatsoever.  You may copy it, give it away or re-use it under the terms of
the Project Gutenberg License included with this eBook or online at
www.gutenberg.org.  If you are not located in the United States, you'll have
to check the laws of the country where you are located before using this ebook.

Title: Star Book No. 57: New Tablecloths

Author: Anonymous

Release Date: August 1, 2020 [EBook #62805]

Language: English

Character set encoding: UTF-8

*** START OF THIS PROJECT GUTENBERG EBOOK STAR BOOK NO. 57: NEW TABLECLOTHS ***




Produced by Stephen Hutcheson and the Online Distributed
Proofreading Team at https://www.pgdp.net






Star Book No. 57: New Tablecloths

10 Cents

STAR
Book No. 57

New Tablecloths

Copyright 1948, American Thread Co.
Printed in U.S.A.

2

Flowers are everybody’s favorite—and these flower-inspired crochet tablecloths are sure to be favorites with you. To make the most of your precious china and silver—to add to the charm of your home, crochet a lovely flower cloth which you and your daughter will use proudly for years. To insure the enduring beauty of your tablecloth make it with STAR Brand Crochet Cotton.

3

Instructions page 20

4

Poinsettia Tablecloth

Materials Required—
AMERICAN THREAD COMPANY
“STAR” MERCERIZED CROCHET COTTON,
ARTICLE 20, SIZE 20

38—250 yd. Balls Cream, Ecru or White or “Gem” Mercerized Crochet Cotton, Article 35, Size 20.
32—300 yd. Balls.
Steel Crochet Hook #11.

Each motif measures about 4¼ inches. 221 motifs 13x17 are required for cloth measuring about 55x72 inches without edge.

MOTIF—Ch 8, join to form a ring, ch 1 and work 16 s c in ring, join in 1st s c.

2nd Row—Ch 7, sl st in 5th st from hook for picot, ch 2, skip 1 s c, s c in next s c, repeat from beginning all around.

3rd Row—Sl st to center of picot, * ch 8, s c in next picot, repeat from * 6 times, ch 4, d c in 1st picot (this brings thread in position for next row).

4th Row—Ch 4, 4 d c over same loop, work 4 d c, ch 1, 4 d c over each remaining loop working 3 d c over remainder of 1st loop, join in 3rd st of ch.

5th Row—Sl st in next st of ch, * ch 7, 7 tr c with ch 1 between each tr c in next ch 1 loop, ch 7, s c in next ch 1 loop, repeat from * 3 times.

6th Row—Sl st to center of loop, s c over same loop, ** ch 5, s c in next ch 1 loop, * ch 3, s c in next ch 1 loop, repeat from * 4 times, ch 5, s c in next loop, ch 6, s c in next loop, repeat from ** twice, ch 5, s c in next ch 1 loop, * ch 3, s c in next ch 1 loop, repeat from * 4 times, ch 5, s c in next loop, ch 2, d c in 1st s c.

7th Row—Ch 3, 2 d c over same loop, ** ch 3, s c in next loop, ch 5, s c in next loop. * ch 3, s c in next loop, repeat from * 3 times, ch 5, s c in next loop, ch 3, 3 d c in next loop, repeat from ** twice, ch 3, s c in next loop, ch 5, s c in next loop, * ch 3, s c in next loop, repeat from * 3 times, ch 5, s c in next loop, ch 3, join in 3rd st of ch.

8th Row—Ch 1, 2 tr c in same space, ** ch 7, skip 1 d c 3 tr c in next d c, ch 3, skip next 3 ch loop, s c in next 5 ch loop, ch 5, s c in next loop, * ch 3, s c in next loop, repeat from * twice, ch 5, s c in next loop, ch 3, 3 tr c in next d c, repeat from ** twice, ch 7, skip 1 d c, 3 tr c in next d c, ch 3, skip next 3 ch loop, s c in next 5 ch loop, ch 5, s c in next loop, * ch 3, s c in next loop, repeat from * twice, ch 5, s c in next loop, ch 3, join in 4th st of ch.

9th Row—Ch 4, 1 tr c in each of the next 2 tr c, ** ch 7, s c in next loop, ch 7, 1 tr c in each of the next 3 tr c, ch 3, skip next 3 ch loop, s c in next 5 ch loop, ch 5, s c in next loop, * ch 3, s c in next loop, repeat from * once, ch 5, s c in next loop, ch 3, 1 tr c in each of the next 3 tr c, repeat from ** twice, ch 7, s c in next loop, ch 7, 1 tr c in each of the next 3 tr c, ch 3, skip next 3 ch loop, s c in next 5 ch loop, ch 5, s c in next loop, * ch 3, s c in next loop, repeat from * once, ch 5, s c in next loop, ch 3, join in 4th st of ch.

10th Row—Ch 4, 1 tr c in each of the next 2 tr c, * ch 9, s c in next loop, ch 9, s c in next loop, ch 9, 1 tr c in each of the next 3 tr c, ch 3, skip next 3 ch loop, s c in next 5 ch loop, ch 5, s c in next loop, ch 3, s c in next loop, ch 5, s c in next loop, ch 3, 1 tr c in each of the next 3 tr c, repeat from * twice, ch 9, s c in next loop, ch 9, s c in next loop, ch 9, 1 tr c in each of the next 3 tr c, ch 3, skip next 3 ch loop, s c in next 5 ch loop, ch 5, s c in next loop, ch 3, s c in next loop, ch 5, s c in next loop, ch 3, join in 4th st of ch.

11th Row—Ch 4, 1 tr c in each of the next 2 tr c, ** ch 9, s c in next loop, ch 5, work 4 cluster sts with ch 5 between each cluster st in next loop (cluster st: * thread over twice, insert in loop, pull through and work off 2 loops twice, repeat from * twice, thread over and work off all loops at one time), ch 5, s c in next loop, ch 9, 1 tr c in each of the next 3 tr c, ch 3, skip next 3 ch loop, s c in next 5 ch loop, * ch 5, s c in next loop, repeat from * once, ch 3, 1 tr c in each of the next 3 tr c, repeat from ** twice, ch 9, s c in next loop, ch 5, work 4 cluster sts with ch 5 between each cluster st in next loop, ch 5, s c in next loop, ch 9, 1 tr c in each of the next 3 tr c, ch 3, skip next 3 ch loop, s c in next 5 ch loop, * ch 5, s c in next loop, repeat from * once, ch 3, join in 4th st of ch.

12th Row—Ch 4, 1 tr c in each of the next 2 tr c, ** ch 9, s c in next loop, * ch 5, cluster st in next loop, repeat from * 4 times, ch 5, s c in next loop, ch 9, 1 tr c in each of the next 3 tr c, ch 3, skip next 3 ch loop, 1 s c in each of the next 2 loops, ch 3, 1 tr c in each of the next 3 tr c, repeat from ** twice, ch 9, s c in next loop, * ch 5, cluster st in next loop, repeat from * 4 times, ch 5, s c in next loop, ch 9, 1 tr c in each of the next 3 tr c, ch 3, skip next 3 ch loop, 1 s c in each of the next 2 loops, ch 3, join in 4th st of ch.

13th Row—Sl st across each tr c and to center st of next loop, s c over same loop. * ch 5, cluster st in next loop, repeat from * twice, ch 5, cluster st in next cluster st, ch 11, cluster st in same space, ch 5, cluster st in next loop, repeat from * twice, ch 5, s c in next loop, ch 9, * thread over twice, insert in next tr c and work off 2 loops twice. repeat from * 5 times, thread over and work off all loops at one time, ch 9, s c in next loop, continue all around in same manner ending row with ch 9, sl st in 1st s c, break thread.

{uncaptioned}

Continuation from page 20

Work a 2nd motif in same manner joining to 1st motif in last row as follows: sl st to center of 1st loop, s c in same loop, * ch 5, cluster st in next loop, repeat from * twice, ch 5, cluster st in next cluster st, ch 6, sl st in corresponding loop of 1st motif, ch 6, cluster st in same cluster st of 2nd motif, * ch 3, sl st in corresponding loop of 1st motif, ch 3, cluster st in next loop of 2nd motif, repeat from * twice, ch 3, sl st in corresponding loop of 1st motif, ch 3, s c in next loop of 2nd motif, ch 5, sl st in corresponding loop of 1st motif, ch 5, * thread over twice, insert in next tr c of 2nd motif, pull through and work off 2 loops twice, repeat from * 5 times, thread over and work off all loops at one time, ch 5, sl st in corresponding loop of 1st motif, ch 5, s c in next loop of 2nd motif, * ch 3, sl st in corresponding loop of 1st motif, ch 3, cluster st in next loop of 2nd motif, repeat from * twice, ch 3, sl st in corresponding loop of 1st motif, ch 3, cluster st in next cluster st of 2nd motif, ch 6, sl st in corresponding loop of 1st motif, ch 6, cluster st in same cluster st of 2nd motif and complete motif same as 1st motif.

Join 3rd motif to 2nd motif and 4th motif to 3rd and 1st motifs in same manner.

EDGE: Attach thread at joining at right hand side before corner, ch 4, cluster st in same space, ch 4, sl st in top of cluster st for picot, ch 5, s c in next loop, ch 4, sl st in top of s c for picot, * ch 5, cluster st in next loop, ch 4, sl st in top of cluster st for picot, ch 5, s c in next loop, ch 4, sl st in top of s c for picot, repeat from * once, ch 5, cluster st in next loop, picot, ch 5, s c in top of tr c group, ch 4, sl st in top of s c for picot, * ch 5, cluster st in next loop, picot, ch 5, s c in next loop, picot, repeat from * twice, ch 5, cluster st in same space, picot, ch 6, sl st in 4th st from hook for picot, ch 2, cluster st in same space, picot, ch 5, s c in same space, picot, (corner) * ch 5, cluster st in next loop, picot, ch 5, s c in next loop, picot, repeat from * once, ch 5, cluster st in next loop, picot, ch 5, s c in top of tr c group, picot, * ch 5, cluster st in next loop, picot, ch 5, s c in next loop, picot, repeat from * twice, ** ch 5, cluster st in joining, picot, * ch 5, s c in next loop, picot, ch 5, cluster st in next loop, picot, repeat from * twice, ch 5, s c in top of tr c group, picot, * ch 5, cluster st in next loop, picot, ch 5, s c in next loop, picot, repeat from * twice, repeat from ** all around working all corner motifs same as 1st corner motif.

If napkins are desired, cut linen the required size. Roll a narrow hem and work a row of s c over hem. Finish with edge same as on cloth.

5
{uncaptioned}
6

Lily of the Valley Tablecloth

Materials Required—
AMERICAN THREAD COMPANY
“STAR” MERCERIZED CROCHET COTTON.
ARTICLE 20. SIZE 30

36—325 yd. Balls White, Ecru or Cream or “Gem” Mercerized Crochet Cotton, Article 35, Size 30.
30—400 yd. Balls.
Steel Crochet Hook #12.

Each motif measures about 3 inches. 567 motifs 21×27 are required for cloth measuring about 63×81 inches without edge.

MOTIF—Ch 8, join to form a ring, ch 4 and work 23 tr c into ring, join in 4th st of ch.

2nd Row—Ch 3, d c in same space, * ch 6, sl st in 5th st from hook for picot, ch 6, sl st in 5th st from hook for picot, ch 1, skip 2 tr c, 2 d c in next tr c, repeat from * 6 times, * ch 6, sl st in 5th st from hook for picot, repeat from *, ch 1, join in 3rd st of ch.

3rd Row—Ch 4, tr c in d c, * ch 6, sl st in 5th st from hook for picot, repeat from * 3 times, ch 1, 1 tr c in each of the next 2 d c, repeat from 1st * all around in same manner, join in 4th st of ch.

4th Row—Ch 10, * tr c in center of 4 picot loop, ch 6, tr c between next 2 tr c, ch 6, tr c in same space, ch 6, tr c in center of next 4 picot loop, ch 6, tr c between next 2 tr c, ch 6, repeat from * twice, tr c in center of next 4 picot loop, ch 6, tr c between next 2 tr c, ch 6, tr c in same space, ch 6, tr c in center of next 4 picot loop, ch 6, join in 4th st of ch.

5th Row—Ch 1, 6 s c over loop, ch 5, s c in next loop, ch 5, 3 d c in next loop, ch 3, 3 d c in same loop, * ch 5, s c in next loop, ch 5, 6 s c over each of the next 2 loops, ch 5, s c in next loop, ch 5, 3 d c in next loop, ch 3, 3 d c in same loop, repeat from * twice, ch 5, s c in next loop, ch 5, 6 s c over next loop, join in 1st s c.

6th Row—Ch 1, 1 s c in each of the next 4 s c, * ch 5, s c in next loop, repeat from * once, ** ch 5, 1 d c in each d c, 3 tr c in corner loop, ch 3, 3 tr c in same space, 1 d c in each d c, * ch 5, s c in next loop, repeat from *, ch 5, skip 2 s c, 1 s c in each of the next 8 s c, * ch 5, s c in next loop, repeat from * once, then repeat from ** all around in same manner ending row with skip 2 s c, 1 s c in each of the next 4 s c, join in 1st s c.

7th Row—Ch 1, 1 s c in each of the next 2 s c, * ch 5, s c in next loop, repeat from * twice, ** ch 5, 1 d c in each of the next 6 sts, 3 tr c in corner loop, ch 5, 3 tr c in same loop, 1 d c in each of the next 6 sts, * ch 5, s c in next loop, repeat from * twice, ch 5, skip 2 s c, 1 s c in each of the next 4 s c, * ch 5, s c in next loop, repeat from * twice, then repeat from ** all around in same manner, join in 1st s c, break thread.

Work a 2nd motif in same manner joining to 1st motif in last row as follows: ch 1, 1 s c in each of the next 2 s c, * ch 5, s c in next loop, repeat from * twice, ch 5, 1 d c in each of the next 6 sts, 3 tr c in corner loop, ch 2, sl st in corresponding loop of 1st motif, 3 tr c in same loop of 2nd motif, 1 d c in each of the next 6 sts, * ch 2, sl st in corresponding loop of 1st motif, ch 2, s c in next loop of 2nd motif, repeat from * twice, ch 2, sl st in corresponding loop of 1st motif, ch 2, skip 2 s c of 2nd motif, 1 s c in each of the next 4 s c, * ch 2, sl st in corresponding loop of 1st motif, ch 2, s c in next loop of 2nd motif, repeat from * twice, ch 2, sl st in corresponding loop of 1st motif, ch 2, 1 d c in each of the next 6 sts of 2nd motif, 3 tr c in corner loop, ch 2, sl st in corresponding loop of 1st motif, ch 2, 3 tr c in same loop of 2nd motif and complete motif same as 1st motif. join 3rd motif to 2nd motif and 4th motif to 1st and 3rd motifs in same manner.

{uncaptioned}

EDGE: With right side of work toward you and starting at corner motif, join thread in center of s c group to the right of corner, * ch 5, s c in next loop, repeat from * 3 times, ch 5, skip 4 d c, s c in next d c, ch 5, 3 tr c in corner loop, ch 5, 3 tr c in same loop, ** ch 5, skip 3 tr c and 1 d c, s c in next d c, * ch 5, s c in next loop, repeat from * 3 times, ch 5, s c in center of s c group, * ch 5, s c in next loop, repeat from * 3 times, ch 5, skip 4 d c, s c in next d c, * ch 5, s c in next loop, repeat from *, then repeat from ** all around working all corners in same manner, join.

2nd Row—Sl st to center of loop, ch 8, sl st in 5th st from hook for picot, d c in next loop, * ch 5, sl st in 5th st from hook for picot, d c in next loop, repeat from * twice, * ch 5, sl st in 5th st from hook for picot, ch 6, sl st in 5th st from hook for picot, d c in next loop, repeat from * once, ch 5, sl st in 5th st from hook for picot, ch 6, sl st in 5th st from hook for picot, repeat from * once, d c in same loop (corner), * ch 5, sl st in 5th st from hook for picot, ch 6, sl st in 5th st from hook for picot, d c in next loop, repeat from * once, ch 5, sl st in 5th st from hook for picot, d c in next loop, repeat from * 10 times, ch 5, sl st in 5th st from hook for picot, d c in same loop, ** ch 5, sl st in 5th st from hook for picot, d c in next loop, * ch 5, sl st in 5th st from hook for picot, d c in next loop, repeat from * 11 times, ch 5, sl st in 5th st from hook for picot, d c in same loop, repeat from ** all around working all corners same as 1st corner.

If napkins are desired, cut linen the size required. Turn under a small hem. Work a row of s c all around.

2nd Row—Ch 7, sl st in 5th st from hook for picot, ch 2, skip 3 s c, s c in next s c, repeat from beginning all around.

7
{uncaptioned}
8

Pond Lily Tablecloth

Materials Required—
AMERICAN THREAD COMPANY
“STAR” MERCERIZED CROCHET COTTON.
ARTICLE 20, SIZE 20

36—250 yd. Balls Cream, Ecru or White or “Gem” Mercerized Crochet Cotton, Article 35, Size 20.
30—300 yd. Balls.
Steel Crochet Hook #11.

Each motif measures about 4½ inches. 192 Motifs 12x16 are required for cloth measuring about 56x74 inches with edge.

MOTIF—Ch 8, join to form a ring, ch 3 and work 23 d c into ring, join in 3rd st of ch.

2nd Row—Ch 12, sl st in 7th st from hook, ch 5, skip 2 d c, s c in next d c, repeat from beginning all around.

3rd Row—5 s c over next loop, sl st in next loop, ch 4, * thread over twice, insert in same loop, pull through and work off 2 loops twice, repeat from * once, thread over and work off all loops at one time, ** ch 5, * thread over twice, insert in same loop, pull through and work off 2 loops twice, repeat from * twice, thread over and work off all loops at one time, repeat from ** twice, ch 5, * thread over twice, insert in same loop, pull through and work off 2 loops twice, repeat from * once, thread over and work off all loops at one time, ch 4, sl st in same loop, 5 s c in next loop, repeat from beginning all around.

4th Row—Sl st across next 5 s c, then ch 4 and to the center of next loop, s c in same loop, * ch 6, s c in next loop, repeat from * twice, s c in next loop, repeat from 1st * all around, join in 1st s c.

5th Row—Sl st in each of the next 2 chs, 3 s c in same loop, * ch 6, 3 s c in next loop, repeat from * all around ending row with ch 3, d c in 1st s c (this brings thread in position for next row).

6th Row—Ch 4 (ch 4 at beginning of row counts as 1 tr c), 2 tr c in same space, * ch 5, 3 s c in next loop, repeat from * once, ch 5, then repeat from beginning all around, join in 4th st of ch.

7th Row—Ch 4, 2 tr c in same space, * ch 7, skip next tr c, 3 tr c in next tr c, ch 6, skip next loop, 5 s c in next loop, ch 6, 3 tr c in next tr c, repeat from * all around, ending row with ch 7, skip next tr c, 3 tr c in next tr c, ch 6, skip next loop, 5 s c in next loop, ch 6, join in 4th st of ch.

8th Row—Ch 4, 1 tr c in each of the next 2 tr c, * ch 7, 3 s c in next loop, ch 7, 1 tr c in each of the next 3 tr c, ch 6, skip 1 s c, 1 s c in each of the next 3 s c, ch 6, 1 tr c in each of the next 3 tr c, repeat from * all around ending row with ch 7, 3 s c in next loop, ch 7, 1 tr c in each of the next 3 tr c, ch 6, skip 1 s c, 1 s c in each of the next 3 s c, ch 6, join in 4th st of ch.

9th Row—Ch 4, 1 tr c in each of the next 2 tr c, * ch 7, 3 s c in next loop, ch 7, 3 s c in next loop, ch 7, 1 tr c in each of the next 3 tr c, ch 6, s c in center 5 c of s c group, ch 6, 1 tr c in each of the next 3 tr c, repeat from * all around in same manner, join in 4th st of ch.

10th Row—Ch 4 (counts as 1 tr c), 1 tr c in each of the next 2 tr c, * ch 7, 3 s c in next loop, repeat from * twice, ch 7, 1 tr c in each of the next 3 tr c, repeat from beginning all around, join, break thread.

Work a 2nd motif in same manner joining to 1st motif in last row as follows: ch 4, 1 tr c in each of the next 2 tr c, * ch 7, 3 s c in next loop, repeat from * once, ch 3, sl st in corresponding loop of 1st motif, ch 3, 3 s c in next loop of 2nd motif, ch 3, sl st in next loop of 1st motif, ch 3, 1 tr c in each of the next 6 tr c of 2nd motif, * ch 3, sl st in corresponding loop of 1st motif, ch 3, 3 s c in next loop of 2nd motif, repeat from * once and complete motif same as 1st motif, break thread.

Join 3rd motif to 2nd motif and 4th motif to 3rd and 1st motifs in same manner.

JOINING MOTIF—Ch 8, join to form a ring, ** ch 4, * thread over twice, insert in ring, pull through and work off 2 loops twice, repeat from *, thread over and work off all loops at one time, ch 4, 3 s c in ring, repeat from ** 3 times.

2nd Row—Sl st to top of ch 4, ch 3, 2 d c in same space, * ch 6, skip next st, 3 d c in next st, ch 5, 3 d c in top of next ch 4, repeat from * twice, ch 6, skip next st, 3 d c in next st, ch 5, join in 3rd st of ch.

3rd Row—Ch 3 (ch 3 at beginning of row counts as 1 d c), 1 d c in each of the next 2 d c, ch 6, 3 s c in next loop, ch 6, 1 d c in each of the next 3 d c, ch 3, s c in next loop, ch 3, repeat from beginning all around, join in 3rd st of ch.

4th Row—Ch 4, 1 tr c in each of the next 2 d c, ch 3, sl st in 3rd free loop of any large motif, ch 3, 3 s c in next loop of joining motif, ch 3, sl st in next free loop of same large motif, ch 3, sl st in next free loop of next large motif, ch 3, 3 s c in next loop of joining motif, ch 3, sl st in next loop of same large motif, ch 3, tr c in each of the next 6 d c of joining motif and continue in same manner until joining is completed.

{uncaptioned}

EDGE: Attach thread in 3rd loop on right hand side before joining of corner motif, ch 1 and work 3 s c in same space, ch 7, 3 s c in next loop, ch 7, 3 s c in next loop, ch 3, thread over needle, insert in same loop with joining, pull through and work off 2 loops, thread over needle, insert in same loop with joining of next motif, pull through and work off all loops 2 at a time, ch 3, 3 s c in next loop, * ch 7, 3 s c in next loop, repeat from * 18 times, ** thread over needle, insert in next loop (same as joining) pull through and work off 2 loops, thread over needle, insert in same loop with joining of next motif, pull through and work off all loops 2 at a time, ch 3, 3 s c in next loop, * ch 7, 3 s c in next loop, repeat from * 10 times, repeat from ** all around working all corner motifs same as 1st corner motif.

Continuation from page 20

2nd Row—Sl st into loop, ch 4, cluster st in same space, * ch 5, sl st in 4th st from hook for picot, ch 1, cluster st in same space, repeat from * twice, ch 5, 2 s c in next loop, ch 4, sl st in top of last 5 c for picot, 2 s c in next ch 7 loop of next motif, ** ch 5, 4 cluster sts with ch 1, picot, ch 1 between each cluster st in next loop, * ch 7, 2 s c in next loop, ch 4, sl st in top of last 5 c for picot, s c in same space, repeat from * twice, repeat from ** 3 times, ch 5, 4 cluster sts with ch 1, picot, ch 1 between each cluster st in next loop, ch 5, 2 s c in next loop, ch 4, sl st in top of last s c for picot, 2 s c in next ch 7 loop of next motif and continue all around in same manner.

If napkins are desired, cut linen the size required. Work a row of s c over a rolled hem.

2nd Row—Ch 7, skip 5 s c, 1 s c in each of the next 3 s c, repeat from beginning all around.

3rd Row—Same as last row of edging on cloth working the 4 cluster sts at corners only.

9
{uncaptioned}
10

Tulip Tablecloth

Materials Required—
AMERICAN THREAD COMPANY
“STAR” MERCERIZED CROCHET COTTON.
ARTICLE 20, SIZE 20

48—250 yd. Balls White, Ecru or Cream or “Gem” Mercerized Crochet Cotton, Article 35, Size 20.
40—300 yd. Balls.
Steel Crochet Hook #11.

Each motif measures about 6 inches. 176 motifs 11x16 are required for cloth measuring 66x96 inches.

LARGE MOTIF—Ch 8, join to form a ring, ch 4, * thread over twice, insert in ring, pull through and work off 2 loops twice, repeat from *, thread over and work off all loops at one time, ** ch 4, * thread over twice, insert in ring, pull through and work off 2 loops twice, repeat from * twice, thread over and work off all loops at one time (a cluster st), repeat from ** 6 times, ch 4, join in 1st cluster st.

2nd Row—Ch 4, tr c in same space, ch 7, 2 tr c in same space, * ch 3, 2 tr c, ch 7, 2 tr c in next cluster st, repeat from * all around, ch 3, join in 4th st of ch.

3rd Row—Sl st to center of loop, ** ch 5, 2 tr c in 1st st of ch, * ch 4, 2 tr c in top of last tr c, (rice st) repeat from * 7 times, s c in top of 4th rice st, ch 4, 2 tr c in same space, ch 4, 2 tr c in top of last tr c, s c in top of 2nd rice st, ch 4, 2 tr c in same space, ch 4, 2 tr c in top of last tr c, skip one loop, s c in next loop, repeat from ** all around, break thread.

{uncaptioned}

4th Row—Join thread between 5th and 6th rice sts, ch 12, d c between next 2 rice sts, * ch 9, d c between next 2 rice sts, repeat from *, ** ch 9, s c between 10th and 11th rice sts, ch 7, tr c between 12th and 13th rice sts, tr c between 1st and 2nd rice sts of next group, ch 7, s c between 3rd and 4th rice sts, ch 9, d c between 5th and 6th rice sts, * ch 9, d c between next 2 rice sts, repeat from * twice, repeat from ** 6 times, ch 9, s c between 10th and 11 rice sts, ch 7, tr c between 12th and 13th rice sts, tr c between 1st and 2nd rice sts of 1st group, ch 7, s c between 3rd and 4th rice sts, ch 9, join in 3rd st of ch.

5th Row—Sl st to loop, ch 3, 2 d c in same space, ch 3, 3 d c, ch 3, 3 d c in same space, ** ch 3, 3 d c, ch 3, 3 d c, ch 3, 3 d c, ch 3, 3 d c in next loop, * ch 3, 3 d c, ch 3, 3 d c, ch 3, 3 d c in next loop, repeat from *, s c in next loop, ch 3, s c in next 7 ch loop, 3 d c, ch 3, 3 d c, ch 3, 3 d c in next loop, ch 3, 3 d c, ch 3, 3 d c, ch 3, 3 d c in next loop, repeat from ** 6 times, ch 3, 3 d c, ch 3, 3 d c, ch 3, 3 d c, ch 3, 3 d c in next loop, * ch 3, 3 d c, ch 3, 3 d c, ch 3, 3 d c in next loop, repeat from *, s c in next loop, ch 3, s c in next 7 ch loop, 3 d c, ch 3, 3 d c, ch 3, 3 d c in next loop, ch 3, join in 3rd st of ch.

6th Row—Sl st to center of next loop, * ch 5, s c in next loop, repeat from * 10 times, ** skip next 3 ch loop, s c in next 3 ch loop, ch 2, sl st in last 5 ch loop of previous scallop, ch 2, s c in next 3 ch loop of 2nd scallop, ch 2, sl st in next 5 ch loop of previous scallop, ch 2, s c in next 3 ch loop of 2nd scallop, * ch 5, s c in next loop, repeat from * 11 times, repeat from ** 6 times, skip next 3 ch loop, s c in next 3 ch loop, ch 2, sl st in last 5 ch loop of previous scallop, ch 2, s c in next 3 ch loop of 1st scallop, ch 2, sl st in next 5 ch loop of previous scallop, ch 2, s c in next 3 ch loop of 1st scallop, ch 3, d c in sl st of 1st loop, (this brings thread in position for next row).

7th Row—Ch 3, s c in next loop, * ch 7, sl st in 5th st from hook for picot, ch 2, 2 d c in next loop, repeat from * 5 times, ch 7, sl st in 5th st from hook for picot, ch 2, s c in next loop, ch 3, s c in next loop, ch 6, sl st in 5th st from hook for picot, ch 1, s c in next loop of next scallop, repeat from beginning all around, break thread.

Work a 2nd motif in same manner joining to 1st motif in last row as follows: ch 3, s c in next loop, * ch 7, sl st in 5th st from hook for picot, ch 2, 2 d c in next loop, repeat from * twice, * ch 5, sl st in corresponding picot of 1st motif, ch 2, complete picot, ch 2, 2 d c in next loop of 2nd motif, repeat from twice, ch 7, sl st in 5th st from hook for picot, ch 2, s c in next loop, ch 3, s c in next loop, ch 6, sl st in 5th st from hook for picot, ch 1, s c in next loop, ch 3, s c in next loop, ch 7, sl st in 5th st from hook for picot, ch 2, 2 d c in next loop, * ch 5, sl st in corresponding picot of 1st motif, ch 2, complete picot, ch 2, 2 d c in next loop of 2nd motif, repeat from * twice and complete motif same as 1st motif, break thread. Join 3rd motif to 2nd motif and 4th motif to 3rd and 1st motifs in same manner.

JOINING MOTIF—Work 1st 2 rows same as large motif.

3rd Row—Work 2 rice sts, ch 2, sl st in center free picot of 1st scallop, ch 2, complete picot, work 2 rice sts, skip next loop of joining motif, s c in next loop, work 2 rice sts, ch 2, sl st in center free picot of next scallop of same motif, ch 2, complete picot, work 2 rice sts, skip next loop of joining motif, s c in next loop, work 2 rice sts, ch 2, sl st in center free picot of next scallop of next motif, ch 2, complete picot and continue in same manner until joining is completed, break thread.

11
{uncaptioned}
12

Instructions page 21

13

Instructions page 21

14

Rose Filet Cloth

Materials Required—
AMERICAN THREAD COMPANY
“STAR” MERCERIZED CROCHET COTTON.
ARTICLE 20. SIZE 30

30—325 yd. Balls White, Cream or Ecru.
3 yds of 36 inch Linen will be required for a cloth measuring about 68 x 103 inches.
Steel Crochet Hook No. 12.

Ch 200, d c in 8th st from hook, 1 d c in each of the next 3 sts of ch, * ch 2, skip 2 sts of ch, d c in next st, repeat from * 14 times, 1 d c in each of the next 3 sts of ch, * ch 2, skip 2 sts of ch, d c in next st, repeat from * 24 times, 1 d c in each of the next 3 sts of ch, * ch 2, skip 2 sts of ch, d c in next st, repeat from * 18 times, 1 d c in each of the next 3 sts of ch, ch 2, skip 2 sts of ch, d c in last st, ch 5 to turn each row.

2nd Row—D c in next d c, 1 d c in each of the next 3 d c, * ch 2, d c in next d c, repeat from * 18 times, 1 d c in each of the next 3 d c (a solid mesh), * 2 d c in mesh, 1 d c in next d c, repeat from * once, * ch 2, d c in next d c (an open mesh), repeat from * 22 times, 1 d c in each of the next 3 d c, * ch 2, d c in next d c, repeat from * 14 times, 1 d c in each of the next 3 d c, ch 2, d c in 3rd st of ch.

3rd Row—1 open mesh, 1 solid mesh, 15 open meshes, 1 solid mesh, 22 open meshes, 2 solid meshes, 21 open meshes, 1 solid mesh, 1 open mesh. Continue working back and forth according to diagram to arrow, then repeat from beginning to arrow 6 times.

Work 2 more lengths of insertion in same manner and finish all edges with a row of s c, working 2 s c in 1 mesh and 3 s c in next mesh and 5 s c in each corner mesh.

Cut 2 strips of linen 4 inches wide and required length. Cut 2 strips of linen 14 inches wide and required length. Work a row of s c over a narrow rolled hem around linen sections. Sew linen and insertion together as illustrated.

EDGE: Join thread in corner, * 1 s c in each of the next 12 s c, ch 5, turn, s c in 6th s c from hook, ch 5, s c in 1st s c made, ch 1, turn and work 9 s c over first ch 5 loop and 5 s c over 2nd loop, ch 5, turn, s c in center st of 1st scallop, ch 1, turn and work 5 s c over loop, ch 3, slip st in top of s c for picot, 4 s c over same loop, sl st in top of 2nd scallop and finish same scallop with 4 more s c, slip st into s c of previous row, repeat from * all around, break thread. If napkins to match are desired, cut squares of linen the size required and work a row of s c over a narrow rolled hem.

EDGE: Starting at corner, * 1 s c in each of the next 6 s c, ch 5, turn, s c in 1st s c, ch 1, turn, work 3 s c over loop, ch 3, slip st in top of s c for picot, 3 s c over same loop, repeat from * all around, break thread.

{uncaptioned}

FILET CROCHET INSTRUCTIONS

OPEN MESH

When worked on a chain, work the first d c in 8th ch from hook * ch 2, skip 2 sts, 1 d c in next st, repeat from *. Succeeding rows, ch 5 to turn and d c in d c, * ch 2, d c in next d c, repeat from *.

SOLID MESH

Four double crochets form 1 solid mesh and 3 d c are required for each additional solid mesh.

To increase a solid mesh at end of row, work a tr c in same space with last d c, work 2 more tr c working each tr c into lower loop of previous st.

To increase 1 open mesh at end of row, ch 2, tr c in same space with last d c.

To increase 1 open mesh at beginning of row, ch 8, d c in 1st d c.

To increase a solid mesh at beginning of row, ch 5, 1 d c in 4th st from hook, 1 d c in next st of ch, d c in next d c.

To decrease a mesh at beginning of row, sl st across 1st mesh.

15
{uncaptioned}
16

Philodendron Crocheted Set

Materials Required—
AMERICAN THREAD COMPANY
“DE LUXE” MERCERIZED CROCHET AND
KNITTING COTTON, ARTICLE 346

3—300 yd. Balls White or Ecru will make 4 mats.
Steel Crochet Hook #6.
Each mat measures about 12 x 16½ inches.
Mats are worked with a double strand of thread.

Ch 95, tr c in 15th st from hook, ch 1, skip 1 st of ch, tr c in next st, ch 1, skip 1 st of ch, tr c in next st, * ch 5, skip 5 sts of ch, tr c in next st, ch 1, skip 1 st of ch, tr c in next st, ch 1, skip 1 st of ch, tr c in next st, repeat from * 6 times, ch 5, tr c in last st of ch.

2nd Row—Ch 8, turn, d c in 1st tr c, * d c in next ch 1 mesh, d c in next tr c, repeat from * once, * ch 5, d c in next tr c, d c in next ch 1 mesh, d c in next tr c, d c in next ch 1 mesh, d c in next tr c, repeat from * 6 times, ch 5, skip 5 sts of ch, d c in next st.

3rd and 4th Rows—Ch 8, turn, 1 d c in each of the next 5 d c, * ch 5, 1 d c in each of the next 5 d c, repeat from * 6 times, ch 5, skip 5 sts of ch, d c in next st.

5th Row—Ch 9, turn, * tr c in next d c, ch 1, skip 1 d c, tr c in next d c, ch 1, skip 1 d c, tr c in next d c, ch 5, repeat from * across row, skip 5 sts of ch, tr c in next st. Repeat the 2nd, 3rd, 4th and 5th rows 4 times, without breaking thread start border, ch 13 and working across short side skip 1 row, d c over end st of next row, * ch 10, skip 3 rows, d c over end st of next row, repeat from * 3 times, ch 10, d c in center st at corner, ch 10, d c in same corner loop, ch 10, skip 1 tr c, d c in next tr c, * ch 10, d c in center tr c of next tr c group, repeat from * 6 times, ch 10, d c in corner loop, ch 10, d c in corner st of same loop, ch 10, skip 1 row, d c over end st of next row, * ch 10, skip 3 rows, d c over end st of next row, repeat from * 3 times, ch 10, d c in center st at corner, ch 10, d c in same corner loop, ch 10, skip 1 tr c, d c in next tr c, * ch 10, d c in center tr c of next group, repeat from * 6 times, ch 10, d c in corner loop, ch 5, d tr c (3 times over needle) in 3rd st of 1st ch 13, this brings thread in position for next row.

There should be 8 loops on each narrow side including corners and 11 loops on each long side including corners (34 loops).

Next Row—Ch 13, d c in next loop, * ch 10, d c in next loop, repeat from * all around ending row same as last row.

Next Row—Same as last row but ending row with ch 10, sl st in 3rd st of ch, break thread.

DIRECTIONS FOR STARCHING MATS

New mats should be washed in mild soap flakes, rinsed and dried.

STARCH: Dissolve ¼ cup of starch in ½ cup of cold water. Cook slowly over a low flame. As it thickens, stir in gradually about 1¼ cups cold water. Cook, stirring constantly until the starch clears, 10 to 12 minutes. This makes a thick pasty mixture. As soon as starch is cool enough to handle, dip mat and squeeze starch through it thoroughly. Wring out extra starch. The mat should be wet with the starch, but there should be none in the spaces. Pin mat in position according to size and leave until thoroughly dry.

“STAR” Mercerized Crochet Cotton, Article 20 comes in sizes 10, 20 and 30, and in shades from White to Dark Linen. Your local dealer will help you select your shade and show you the other American Thread Company “STAR” Brand Crochet Cottons.

Gem Mercerized Crochet Cotton, Article 35, comes in many lovely shades to fit in with your personal scheme of interior decoration. It is also available in white, of course. It would be particularly charming for any one of the tablecloths shown in this book.

17
{uncaptioned}
18

Chrysanthemum Tablecloth

Materials Required—
AMERICAN THREAD COMPANY
“STAR” MERCERIZED CROCHET COTTON.
ARTICLE 20. SIZE 30

40—325 yd. Balls White, Ecru or Cream or “Gem” Mercerized Crochet Cotton, Article 36, Size 30.
33—400 yd. Balls.
Steel Crochet Hook #12.

Each motif measures about 3 inches. 567 motifs, 21x27 are required for a cloth measuring about 63x81 inches.

MOTIF—Ch 12, join to form a ring, ch 3, * thread over, insert in ring, pull through and work off 2 loops, repeat from *, then work off remaining loops at one time, ** ch 4, * thread over needle, insert in ring, pull through and work off 2 loops, repeat from * twice, thread over and work off remaining loops at one time (this is a cluster stitch), repeat from ** until there are 8 cluster sts in ring, ch 4, join.

2nd Row—Ch 6, sl st in 4th st from hook for picot, ch 7, sl st in 4th st from hook for picot, ch 2, s c in next cluster st, repeat from beginning all around, join.

3rd Row—Sl st to center of picot loop, * ch 9, s c in center of next picot loop, repeat from * all around, join.

4th Row—Sl st into loop, ch 3 and work 3 cluster sts with ch 3 between each cluster st in same loop, * ch 6, 3 cluster sts with ch 3 between each cluster st in next loop, repeat from * all around, ch 6, join in 1st cluster st.

5th Row—Sl st in ch 3 loop, ch 3, work 2 cluster sts with ch 3 between in same loop, ch 3, 2 cluster sts with ch 3 between in next loop, * ch 6, skip 1 loop, 2 cluster sts with ch 3 between in next loop, ch 3, 2 cluster sts with ch 3 between in next loop, repeat from all around, ch 6, join.

6th Row—Sl st into loop, ch 3 and work 2 cluster sts with ch 3 between in same loop, * ch 3, 2 cluster sts with ch 3 between in next loop, repeat from * once, ** ch 1 s c over the ch 6 loops of 2 previous rows, ch 4, 2 cluster sts with ch 3 between in next ch 3 loop, * ch 3, 2 cluster sts with ch 3 between in next loop, repeat from * once, then repeat from ** all around, join in 1st cluster st.

7th Row—Ch 1, * 2 s c, 4 ch picot, 1 s c in each 3 ch loop, ch 6, sl st in 4th st from hook for picot, ch 2, skip the 2-ch 4 loops, repeat from * all around, join, break thread.

Work another motif in same manner joining it to 1st motif in last row as follows: work 2 s c in 1st ch 3 loop, ch 2, sl st in corresponding picot of 1st motif, ch 2, complete picot, 1 s c in same loop of 2nd motif, join the next 4 picots of 2nd motif in same manner and complete motif same as 1st motif. Join 3rd motif to 2nd motif and join 4th motif to 3rd and 1st motifs in same manner leaving 2 picots free between joinings.

JOINING MOTIF—Work 1st row of large motif, * ch 5, join to 3rd free picot of large motif, ch 2, sl st in 3rd st of ch to complete picot, ch 5, skip 1 picot, sl st in next picot of same large motif, ch 2, sl st in 3rd st of ch to complete picot, ch 2, s c in next cluster st of small motif, ch 6, sl st in 4th st from hook for picot, ch 2, s c in next cluster st of small motif, repeat from * all around joining all motifs in same manner, break thread.

{uncaptioned}
19
{uncaptioned}
20

Daisy Tablecloth

Illustrated on page 3

Materials Required—
AMERICAN THREAD COMPANY
“STAR” MERCERIZED CROCHET COTTON.
ARTICLE 20, SIZE 20

35—250 yd. Balls Cream, White or Ecru or “Gem” Mercerized Crochet Cotton, Article 35, Size 20.
30—300 yd. Balls.
Steel Crochet Hook #11.

Each motif measures about 2½ inches. 660 motifs 22x30 are required for cloth measuring about 55x75 inches.

Ch 8, join to form a ring, ch 1 and work 16 s c in ring, join in 1st s c.

2nd Row—* Ch 16, s c in next s c, repeat from * 14 times, ch 7, tr tr c (4 times over needle) in joining, this brings thread in position for next row.

3rd Row—* Ch 6, s c in next loop, repeat from * 14 times, ch 3, d c in tr tr c.

4th Row—Ch 6, 3 d c in same loop, * 3 d c, ch 3, 3 d c in next loop, repeat from * 14 times, 2 d c in 1st loop, join in 3rd st of ch.

5th Row—Sl st to loop, ch 5, d tr c (3 times over needle) in same space, ch 5, 2 d tr c in same space, ch 11, 2 d tr c in same space, ch 5, 2 d tr c in same space, * ch 5, s c in next loop, ch 5, 2 d c, ch 5, 2 d c in next loop, ch 5, s c in next loop, ch 5, 2 d tr c, ch 5, 2 d tr c, ch 11, 2 d tr c, ch 5, 2 d tr c in next loop, repeat from * twice, ch 5, s c in next loop, ch 5, 2 d c, ch 5, 2 d c in next loop, ch 5, s c in next loop, ch 5, join in 5th st of ch, break thread.

Work a 2nd motif in same manner joining to 1st motif in last row as follows: sl st to loop, ch 5, d tr c in same space, ch 5, 2 d tr c in same space, ch 5, sl st in corresponding loop of 1st motif, ch 5, 2 d tr c in same space of 2nd motif, ch 2, sl st in corresponding loop of 1st motif, ch 2, 2 d tr c in same space of 2nd motif, ch 5, s c in next loop of 2nd motif, ch 5, 2 d c in next loop of 2nd motif, ch 2, sl st in corresponding loop of 1st motif, ch 2, 2 d c in same loop of 2nd motif, ch 5, s c in next loop of 2nd motif, ch 5, 2 d tr c in next loop of 2nd motif, ch 2, sl st in corresponding loop of 1st motif, ch 2, 2 d tr c in same space of 2nd motif, ch 5, sl st in corresponding loop of 1st motif, ch 5, 2 d tr c in same space of 2nd motif, ch 5, 2 d tr c in same space of 2nd motif and complete motif as 1st motif. Join all motifs in same manner.

{uncaptioned}
21

Carnation Luncheon Set

Illustrated on page 12

Materials Required—
AMERICAN THREAD COMPANY
“SILLATEEN SANSIL”. ARTICLE 101

9—210 yd. Balls White.
6—210 yd. Balls Red or any Contrasting Color will make 4 mats.
Each mat measures about 12¼ x 18¼ inches.
Steel Crochet Hook #10.

With Red, ch 4, 3 d c in 4th st from hook, ch 3, turn.

2nd Row—2 d c in 1st d c, skip 1 d c, sl st in next d c, ch 3, 2 d c in same space with sl st (shell), ch 3, turn.

3rd Row—2 d c in 1st d c, sl st in the ch 3 of same shell, ch 3, 2 d c in same space, sl st in ch 3 of next shell, ch 3, 2 d c in same space, ch 3, turn. Repeat the 3rd row having one more shell in each row and ending each row with 2 d c in same space until there are 18 shells in row, break Red.

Next Row—Attach White and work in same manner (when changing Color always complete last half of st with next Color). Work 1 more row in White, break White. Attach Red and work 2 rows in same manner, break Red. Continue in same manner working 2 rows White, 2 rows Red, 2 rows White, 2 rows Red, 2 rows White, 8 rows Red, 2 rows White, 2 rows Red, 2 rows White, 2 rows Red, 2 rows White, 2 rows Red, 11 rows White (63 shells in last row), ch 3, turn.

Next Row—2 d c in 1st d c, sl st in ch 3 of same shell, ch 3, 2 d c in same space, * sl st in ch 3 of next shell, ch 3, 2 d c in same space, repeat from * to end of row ending with a sl st in the ch 3 of last shell, ch 1, turn (63 shells in each remaining row).

Next Row—Sl st to ch 3 of 1st shell, ch 3, 2 d c in same space, sl st in ch 3 of next shell, then continue working in shells across row working 2 d c in same space with last sl st, ch 3, turn. Repeat the last 2 rows working 9 more rows White, 2 rows Red, 2 rows White, 2 rows Red, 2 rows White, 2 rows Red, 12 rows White.

Next Row—Sl st to ch 3 of 1st shell, ch 3, 2 d c in same space, sl st in ch 3 of next shell, continue working in shells across row ending row with a sl st in last shell, ch 1, turn. Repeat last row for remainder of mat having 1 shell less in each row working 9 more rows White, 2 rows Red, 2 rows White, 2 rows Red, 2 rows White, 2 rows Red, 2 rows White, 8 rows Red, 2 rows White, * 2 rows Red, 2 rows White, repeat from * twice, break White.

Attach Red and continue in same manner until 2 shells remain. ch 1, turn, sl st to ch 3 of shell, ch 3, thread over, insert in same space, pull through and work off 2 loops, thread over, insert in 1st d c of next shell, pull through and work off 2 loops, thread over, insert in next d c of same shell, pull through, work off 2 loops, thread over and work off all loops at one time, break thread and fasten securely.

EDGE: With Red, * ch 3, 2 d c in same space, skip the length of a d c, s c in next st, repeat from * all around.

Daffodil Luncheon Set

Illustrated on page 13

Materials Required—
AMERICAN THREAD COMPANY
“PURITAN” MERCERIZED CROCHET AND
KNITTING COTTON. ARTICLE 40

9—200 yd. Balls Yellow or any Color desired—will make 4 doilies.
Steel Crochet Hook #7.

Each doily measures about 19 inches in diameter.

Ch 6, join to form a ring, ch 1 and work 8 s c in ring, do not join this or the following rows, place a marker at beginning of each row.

2nd Row—2 s c in each s c.

3rd Row—Working in s c, increase in every other st.

4th Row—Increase in every 3rd s c.

5th Row—Increase in every 4th s c.

6th Row—Increase in every 5th s c, then work 1 row even.

8th Row—Increase in every 6th s c.

9th Row—Increase in every 7th s c, then work 1 row even.

11th Row—Increase in every 8th s c.

12th Row—Increase in every 9th s c, then work 1 row even.

14th Row—Increase in every 10th s c.

15th Row—Increase in every 11th s c.

16th Row—Increase in every 12th s c. Repeat the 11th, 12th, 13th and 14th rows.

21st & 22nd Rows—Work even.

23rd Row—Increase in every 11th s c, then work 5 rows even.

29th Row—Increase in every 6th s c, then work 4 rows even.

34th Row—Increase in every 7th s c, then work 1 row even.

36th Row—Increase in every 8th s c, then work 4 rows even.

41st Row—Increase in every 9th s c, then work 3 rows even.

45th Row—Increase in every 10th s c, then work 4 rows even.

50th Row—Increase in every 11th s c, then work 4 rows even (312 s c), sl st in next 2 s c to even row.

55th Row—* Ch 6, skip 3 s c, s c in next s c, repeat from * all around ending row with ch 3, d c in same st with the 1st ch 6, this brings thread in position for next row (78 loops).

56th Row—* Ch 7, s c in next loop, repeat from * all around ending row with ch 3, tr c in d c.

57th Row—Same as last row ending row with ch 3, tr c in tr c.

22

58th Row—Same as last row but having 8 chs in each loop and ending row with ch 4, tr c in tr c.

59th Row—Ch 4, s c in same loop ** ch 4, 2 cluster sts with ch 5 between in next loop (cluster st: thread over needle, insert in loop, pull through and work off 2 loops, * thread over needle, insert in same space, pull through and work off 2 loops, repeat from *, thread over and work off all loops at one time), ch 4, s c in next loop, ch 4, s c in same loop (picot loop) repeat from ** all around ending row with ch 4, 2 cluster sts with ch 5 between in next loop, ch 4, join in base of 1st picot loop.

60th Row—Sl st into the picot loop, * ch 7, s c in ch 5 loop between next 2 cluster sts, ch 4, s c in same space (picot loop), ch 7, s c in next picot loop, repeat from * all around ending row with ch 4, tr c in sl st.

61st Row—Ch 8, d c in same loop, * ch 5, sl st in 4th st from hook for picot, ch 1, 1 d c, ch 5, 1 d c (shell) in next ch 7 loop, repeat from * all around ending row with ch 5, sl st in 4th st from hook for picot, ch 1, join in 3rd st of ch.

62nd Row—Sl st into shell, * ch 4, s c in same space, ch 8, skip the picot, s c in center of next shell, repeat from * all around ending row with ch 4, s c in same space, ch 4, tr c in sl st.

63rd Row—Same as 61st row working a shell in each 8 ch loop.

64th Row—Sl st into shell and work 2 cluster sts with ch 5 between in same space, * ch 6, s c in next shell, ch 4, s c in same space, ch 6, 2 cluster sts with ch 5 between in next shell, repeat from * all around ending row with ch 6, s c, ch 4, s c in next loop, ch 6, join in top of 1st cluster st.

65th Row—Sl st into loop, * ch 4, s c in same space, ch 9, s c in next picot loop, ch 9, 1 s c, ch 4, 1 s c between next 2 cluster sts, repeat from * all around in same manner ending row with Ch 4, d tr c in sl st.

66th Row—* Ch 10, s c in next ch 9 loop, repeat from * all around ending row with ch 5, tr tr c (4 times over needle) in d tr c.

67th Row—* Ch 10, s c in next loop, repeat from * all around ending row same as last row.

68th Row—Ch 1, s c in same space, * ch 6, 2 cluster sts with ch 6 between in next loop, ch 6, s c in next loop, repeat from * all around, join in 1st s c.

69th Row—Ch 1, s c in same s c, ** ch 6, cluster st between next 2 cluster sts, * ch 5, sl st in 4th st from hook for picot, ch 1, cluster st in same space, repeat from * twice, ch 6, s c in next s c, repeat from ** all around, break thread.

REMEMBER DYE LOTS

To insure the best results make certain that the “STAR” Brand Crochet Cotton you buy to crochet your tablecloth is of one dye lot. The best way to be sure of this is to purchase sufficient material at one time to complete your piece. Or you can ask your dealer to reserve enough “STAR” Brand Crochet Cotton for you.

A SERVICE FOR YOU—OUR CUSTOMERS

Occasionally even the most skilled needlewoman needs a helping hand with her work and the beginner needs guidance over the bumpy path of learning. We extend that helping hand by offering you the assistance of Cecilia Vanek with your needlework problems. No question is too small for us to help you with and we will welcome your letters. Write to Cecilia Vanek, The American Thread Co., 260 West Broadway, New York 13, N. Y.

WASHING AND BLOCKING CROCHET

Using hot water and a mild soap, make thick suds, add cold water until suds are lukewarm.

Let the article stand in the suds a very few minutes, then squeeze in and out until thoroughly clean. Rinse in clear water several times or until sure the soap is removed. Roll in a bath towel. This will absorb some of the moisture.

The work is now ready for blocking. Lay the work on a padded ironing board or a flat surface and pin in position with rust proof pins, stretching it gently to correct size and shape. Press through a damp cloth and leave in position until dry.

CROCHET ABBREVIATIONS

ch Chain
st(s) Stitch(es)
sl-st Slip st.
s c Single Crochet
s d c Short Double Crochet
d c Double Crochet
tr c Treble Crochet
d tr c Double Treble Crochet
tr tr c Triple Treble Crochet

* (asterisk) When this symbol appears, continue working until directions refer you back to this symbol.

23

More Star Books

Star Book No. 52
AFGHANS

Star Book No. 44
DOILIES

Star Book No. 41
EDGINGS (copyrighted)

Star Book No. 55
POTHOLDERS

Star Book No. 51
RUGS

Star Book No. 42
REVISED BEGINNER’S MANUAL

Star Book No. 46
CHAIR BACKS

Star Book No. 53
THE NEW BABY BOOK

Star Book No. 50
EMBLEMS AND CHURCH LACES

Star Book No. 49
NEW TABLE DESIGNS

These STAR Books are available for 10 cents each at your favorite dealer or write to

Logo

THE AMERICAN THREAD COMPANY
260 W. Broadway, New York 13, N. Y.

Transcriber’s Notes






End of Project Gutenberg's Star Book No. 57: New Tablecloths, by Anonymous

*** END OF THIS PROJECT GUTENBERG EBOOK STAR BOOK NO. 57: NEW TABLECLOTHS ***

***** This file should be named 62805-h.htm or 62805-h.zip *****
This and all associated files of various formats will be found in:
        http://www.gutenberg.org/6/2/8/0/62805/

Produced by Stephen Hutcheson and the Online Distributed
Proofreading Team at https://www.pgdp.net

Updated editions will replace the previous one--the old editions will
be renamed.

Creating the works from print editions not protected by U.S. copyright
law means that no one owns a United States copyright in these works,
so the Foundation (and you!) can copy and distribute it in the United
States without permission and without paying copyright
royalties. Special rules, set forth in the General Terms of Use part
of this license, apply to copying and distributing Project
Gutenberg-tm electronic works to protect the PROJECT GUTENBERG-tm
concept and trademark. Project Gutenberg is a registered trademark,
and may not be used if you charge for the eBooks, unless you receive
specific permission. If you do not charge anything for copies of this
eBook, complying with the rules is very easy. You may use this eBook
for nearly any purpose such as creation of derivative works, reports,
performances and research. They may be modified and printed and given
away--you may do practically ANYTHING in the United States with eBooks
not protected by U.S. copyright law. Redistribution is subject to the
trademark license, especially commercial redistribution.

START: FULL LICENSE

THE FULL PROJECT GUTENBERG LICENSE
PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK

To protect the Project Gutenberg-tm mission of promoting the free
distribution of electronic works, by using or distributing this work
(or any other work associated in any way with the phrase "Project
Gutenberg"), you agree to comply with all the terms of the Full
Project Gutenberg-tm License available with this file or online at
www.gutenberg.org/license.

Section 1. General Terms of Use and Redistributing Project
Gutenberg-tm electronic works

1.A. By reading or using any part of this Project Gutenberg-tm
electronic work, you indicate that you have read, understand, agree to
and accept all the terms of this license and intellectual property
(trademark/copyright) agreement. If you do not agree to abide by all
the terms of this agreement, you must cease using and return or
destroy all copies of Project Gutenberg-tm electronic works in your
possession. If you paid a fee for obtaining a copy of or access to a
Project Gutenberg-tm electronic work and you do not agree to be bound
by the terms of this agreement, you may obtain a refund from the
person or entity to whom you paid the fee as set forth in paragraph
1.E.8.

1.B. "Project Gutenberg" is a registered trademark. It may only be
used on or associated in any way with an electronic work by people who
agree to be bound by the terms of this agreement. There are a few
things that you can do with most Project Gutenberg-tm electronic works
even without complying with the full terms of this agreement. See
paragraph 1.C below. There are a lot of things you can do with Project
Gutenberg-tm electronic works if you follow the terms of this
agreement and help preserve free future access to Project Gutenberg-tm
electronic works. See paragraph 1.E below.

1.C. The Project Gutenberg Literary Archive Foundation ("the
Foundation" or PGLAF), owns a compilation copyright in the collection
of Project Gutenberg-tm electronic works. Nearly all the individual
works in the collection are in the public domain in the United
States. If an individual work is unprotected by copyright law in the
United States and you are located in the United States, we do not
claim a right to prevent you from copying, distributing, performing,
displaying or creating derivative works based on the work as long as
all references to Project Gutenberg are removed. Of course, we hope
that you will support the Project Gutenberg-tm mission of promoting
free access to electronic works by freely sharing Project Gutenberg-tm
works in compliance with the terms of this agreement for keeping the
Project Gutenberg-tm name associated with the work. You can easily
comply with the terms of this agreement by keeping this work in the
same format with its attached full Project Gutenberg-tm License when
you share it without charge with others.

1.D. The copyright laws of the place where you are located also govern
what you can do with this work. Copyright laws in most countries are
in a constant state of change. If you are outside the United States,
check the laws of your country in addition to the terms of this
agreement before downloading, copying, displaying, performing,
distributing or creating derivative works based on this work or any
other Project Gutenberg-tm work. The Foundation makes no
representations concerning the copyright status of any work in any
country outside the United States.

1.E. Unless you have removed all references to Project Gutenberg:

1.E.1. The following sentence, with active links to, or other
immediate access to, the full Project Gutenberg-tm License must appear
prominently whenever any copy of a Project Gutenberg-tm work (any work
on which the phrase "Project Gutenberg" appears, or with which the
phrase "Project Gutenberg" is associated) is accessed, displayed,
performed, viewed, copied or distributed:

  This eBook is for the use of anyone anywhere in the United States and
  most other parts of the world at no cost and with almost no
  restrictions whatsoever. You may copy it, give it away or re-use it
  under the terms of the Project Gutenberg License included with this
  eBook or online at www.gutenberg.org. If you are not located in the
  United States, you'll have to check the laws of the country where you
  are located before using this ebook.

1.E.2. If an individual Project Gutenberg-tm electronic work is
derived from texts not protected by U.S. copyright law (does not
contain a notice indicating that it is posted with permission of the
copyright holder), the work can be copied and distributed to anyone in
the United States without paying any fees or charges. If you are
redistributing or providing access to a work with the phrase "Project
Gutenberg" associated with or appearing on the work, you must comply
either with the requirements of paragraphs 1.E.1 through 1.E.7 or
obtain permission for the use of the work and the Project Gutenberg-tm
trademark as set forth in paragraphs 1.E.8 or 1.E.9.

1.E.3. If an individual Project Gutenberg-tm electronic work is posted
with the permission of the copyright holder, your use and distribution
must comply with both paragraphs 1.E.1 through 1.E.7 and any
additional terms imposed by the copyright holder. Additional terms
will be linked to the Project Gutenberg-tm License for all works
posted with the permission of the copyright holder found at the
beginning of this work.

1.E.4. Do not unlink or detach or remove the full Project Gutenberg-tm
License terms from this work, or any files containing a part of this
work or any other work associated with Project Gutenberg-tm.

1.E.5. Do not copy, display, perform, distribute or redistribute this
electronic work, or any part of this electronic work, without
prominently displaying the sentence set forth in paragraph 1.E.1 with
active links or immediate access to the full terms of the Project
Gutenberg-tm License.

1.E.6. You may convert to and distribute this work in any binary,
compressed, marked up, nonproprietary or proprietary form, including
any word processing or hypertext form. However, if you provide access
to or distribute copies of a Project Gutenberg-tm work in a format
other than "Plain Vanilla ASCII" or other format used in the official
version posted on the official Project Gutenberg-tm web site
(www.gutenberg.org), you must, at no additional cost, fee or expense
to the user, provide a copy, a means of exporting a copy, or a means
of obtaining a copy upon request, of the work in its original "Plain
Vanilla ASCII" or other form. Any alternate format must include the
full Project Gutenberg-tm License as specified in paragraph 1.E.1.

1.E.7. Do not charge a fee for access to, viewing, displaying,
performing, copying or distributing any Project Gutenberg-tm works
unless you comply with paragraph 1.E.8 or 1.E.9.

1.E.8. You may charge a reasonable fee for copies of or providing
access to or distributing Project Gutenberg-tm electronic works
provided that

* You pay a royalty fee of 20% of the gross profits you derive from
  the use of Project Gutenberg-tm works calculated using the method
  you already use to calculate your applicable taxes. The fee is owed
  to the owner of the Project Gutenberg-tm trademark, but he has
  agreed to donate royalties under this paragraph to the Project
  Gutenberg Literary Archive Foundation. Royalty payments must be paid
  within 60 days following each date on which you prepare (or are
  legally required to prepare) your periodic tax returns. Royalty
  payments should be clearly marked as such and sent to the Project
  Gutenberg Literary Archive Foundation at the address specified in
  Section 4, "Information about donations to the Project Gutenberg
  Literary Archive Foundation."

* You provide a full refund of any money paid by a user who notifies
  you in writing (or by e-mail) within 30 days of receipt that s/he
  does not agree to the terms of the full Project Gutenberg-tm
  License. You must require such a user to return or destroy all
  copies of the works possessed in a physical medium and discontinue
  all use of and all access to other copies of Project Gutenberg-tm
  works.

* You provide, in accordance with paragraph 1.F.3, a full refund of
  any money paid for a work or a replacement copy, if a defect in the
  electronic work is discovered and reported to you within 90 days of
  receipt of the work.

* You comply with all other terms of this agreement for free
  distribution of Project Gutenberg-tm works.

1.E.9. If you wish to charge a fee or distribute a Project
Gutenberg-tm electronic work or group of works on different terms than
are set forth in this agreement, you must obtain permission in writing
from both the Project Gutenberg Literary Archive Foundation and The
Project Gutenberg Trademark LLC, the owner of the Project Gutenberg-tm
trademark. Contact the Foundation as set forth in Section 3 below.

1.F.

1.F.1. Project Gutenberg volunteers and employees expend considerable
effort to identify, do copyright research on, transcribe and proofread
works not protected by U.S. copyright law in creating the Project
Gutenberg-tm collection. Despite these efforts, Project Gutenberg-tm
electronic works, and the medium on which they may be stored, may
contain "Defects," such as, but not limited to, incomplete, inaccurate
or corrupt data, transcription errors, a copyright or other
intellectual property infringement, a defective or damaged disk or
other medium, a computer virus, or computer codes that damage or
cannot be read by your equipment.

1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the "Right
of Replacement or Refund" described in paragraph 1.F.3, the Project
Gutenberg Literary Archive Foundation, the owner of the Project
Gutenberg-tm trademark, and any other party distributing a Project
Gutenberg-tm electronic work under this agreement, disclaim all
liability to you for damages, costs and expenses, including legal
fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT
LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE
PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE
TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE
LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR
INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGE.

1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a
defect in this electronic work within 90 days of receiving it, you can
receive a refund of the money (if any) you paid for it by sending a
written explanation to the person you received the work from. If you
received the work on a physical medium, you must return the medium
with your written explanation. The person or entity that provided you
with the defective work may elect to provide a replacement copy in
lieu of a refund. If you received the work electronically, the person
or entity providing it to you may choose to give you a second
opportunity to receive the work electronically in lieu of a refund. If
the second copy is also defective, you may demand a refund in writing
without further opportunities to fix the problem.

1.F.4. Except for the limited right of replacement or refund set forth
in paragraph 1.F.3, this work is provided to you 'AS-IS', WITH NO
OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.

1.F.5. Some states do not allow disclaimers of certain implied
warranties or the exclusion or limitation of certain types of
damages. If any disclaimer or limitation set forth in this agreement
violates the law of the state applicable to this agreement, the
agreement shall be interpreted to make the maximum disclaimer or
limitation permitted by the applicable state law. The invalidity or
unenforceability of any provision of this agreement shall not void the
remaining provisions.

1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the
trademark owner, any agent or employee of the Foundation, anyone
providing copies of Project Gutenberg-tm electronic works in
accordance with this agreement, and any volunteers associated with the
production, promotion and distribution of Project Gutenberg-tm
electronic works, harmless from all liability, costs and expenses,
including legal fees, that arise directly or indirectly from any of
the following which you do or cause to occur: (a) distribution of this
or any Project Gutenberg-tm work, (b) alteration, modification, or
additions or deletions to any Project Gutenberg-tm work, and (c) any
Defect you cause.

Section 2. Information about the Mission of Project Gutenberg-tm

Project Gutenberg-tm is synonymous with the free distribution of
electronic works in formats readable by the widest variety of
computers including obsolete, old, middle-aged and new computers. It
exists because of the efforts of hundreds of volunteers and donations
from people in all walks of life.

Volunteers and financial support to provide volunteers with the
assistance they need are critical to reaching Project Gutenberg-tm's
goals and ensuring that the Project Gutenberg-tm collection will
remain freely available for generations to come. In 2001, the Project
Gutenberg Literary Archive Foundation was created to provide a secure
and permanent future for Project Gutenberg-tm and future
generations. To learn more about the Project Gutenberg Literary
Archive Foundation and how your efforts and donations can help, see
Sections 3 and 4 and the Foundation information page at
www.gutenberg.org



Section 3. Information about the Project Gutenberg Literary Archive Foundation

The Project Gutenberg Literary Archive Foundation is a non profit
501(c)(3) educational corporation organized under the laws of the
state of Mississippi and granted tax exempt status by the Internal
Revenue Service. The Foundation's EIN or federal tax identification
number is 64-6221541. Contributions to the Project Gutenberg Literary
Archive Foundation are tax deductible to the full extent permitted by
U.S. federal laws and your state's laws.

The Foundation's principal office is in Fairbanks, Alaska, with the
mailing address: PO Box 750175, Fairbanks, AK 99775, but its
volunteers and employees are scattered throughout numerous
locations. Its business office is located at 809 North 1500 West, Salt
Lake City, UT 84116, (801) 596-1887. Email contact links and up to
date contact information can be found at the Foundation's web site and
official page at www.gutenberg.org/contact

For additional contact information:

    Dr. Gregory B. Newby
    Chief Executive and Director
    gbnewby@pglaf.org

Section 4. Information about Donations to the Project Gutenberg
Literary Archive Foundation

Project Gutenberg-tm depends upon and cannot survive without wide
spread public support and donations to carry out its mission of
increasing the number of public domain and licensed works that can be
freely distributed in machine readable form accessible by the widest
array of equipment including outdated equipment. Many small donations
($1 to $5,000) are particularly important to maintaining tax exempt
status with the IRS.

The Foundation is committed to complying with the laws regulating
charities and charitable donations in all 50 states of the United
States. Compliance requirements are not uniform and it takes a
considerable effort, much paperwork and many fees to meet and keep up
with these requirements. We do not solicit donations in locations
where we have not received written confirmation of compliance. To SEND
DONATIONS or determine the status of compliance for any particular
state visit www.gutenberg.org/donate

While we cannot and do not solicit contributions from states where we
have not met the solicitation requirements, we know of no prohibition
against accepting unsolicited donations from donors in such states who
approach us with offers to donate.

International donations are gratefully accepted, but we cannot make
any statements concerning tax treatment of donations received from
outside the United States. U.S. laws alone swamp our small staff.

Please check the Project Gutenberg Web pages for current donation
methods and addresses. Donations are accepted in a number of other
ways including checks, online payments and credit card donations. To
donate, please visit: www.gutenberg.org/donate

Section 5. General Information About Project Gutenberg-tm electronic works.

Professor Michael S. Hart was the originator of the Project
Gutenberg-tm concept of a library of electronic works that could be
freely shared with anyone. For forty years, he produced and
distributed Project Gutenberg-tm eBooks with only a loose network of
volunteer support.

Project Gutenberg-tm eBooks are often created from several printed
editions, all of which are confirmed as not protected by copyright in
the U.S. unless a copyright notice is included. Thus, we do not
necessarily keep eBooks in compliance with any particular paper
edition.

Most people start at our Web site which has the main PG search
facility: www.gutenberg.org

This Web site includes information about Project Gutenberg-tm,
including how to make donations to the Project Gutenberg Literary
Archive Foundation, how to help produce our new eBooks, and how to
subscribe to our email newsletter to hear about new eBooks.